Browse our 2020 Mercury SeaPro 300XXL pair: one model is listed here: a pre-owned pair of SeaPro 300 engines with 30-inch shafts and DTS controls. The photo shows a new Mercury 300 HP V8 for reference.
2020 Mercury SeaPro 300XXL Pair Listings
Each listing has full specifications, the model code explained and buying advice. Current prices are shown on each product page.
- Mercury 300XXL SeaPro Pair: 300 HP (each engine, sold as a pair), 30 in shaft, digital throttle and shift controls
2020 Mercury SeaPro 300XXL pair: Key Specifications
Engines in this category range from portable singles to larger multi-cylinder four-strokes. SeaPro is Mercury’s commercial outboard line, built on the 4.6-litre V8 platform for long daily running hours.
- Shaft lengths: 30 in
- Rotation: standard rotation
- Control options: digital throttle and shift
Choosing From the 2020 Mercury SeaPro 300XXL pair Range
Start with your boat’s capacity plate, which states the maximum horsepower and engine weight the hull is rated for. Then match the shaft length to your transom height, measured from the top of the transom to the bottom of the hull on the centreline; our long shaft vs short shaft guide shows how. Decide on controls early: digital controls make multi-engine rigging smoother, while mechanical controls keep costs down on a single-engine boat. Finally, choose the right propeller with our propeller buying guide.
Who the 2020 Mercury SeaPro 300XXL pair Range Suits
A used SeaPro pair suits commercial, charter and offshore operators who want twin V8 power at a lower price than new. Ask for service records and compression readings, and read our used Mercury outboard guide. Our guide on how to choose an outboard motor walks through the main decisions, and our Mercury outboard buying guide covers the whole range.
Rigging, Fuel Economy and Running Costs
Budget for more than the engine itself. Remote-control engines need controls, steering, gauges, a heavy-duty marine battery and professional rigging, which can add noticeably to the cost of a repower. Modern four-strokes are far more economical than older two-strokes, and you can cut fuel use further by trimming the boat correctly, keeping the hull clean, matching the propeller to the load and cruising just above planing speed rather than at full throttle. If you are replacing an older engine, our repower cost guide helps you plan the whole job.
Owning and Maintaining Your Mercury Outboard
Every new engine needs a careful break-in; follow the owner’s manual and our outboard break-in guide. After that, regular servicing keeps it reliable: change the engine oil and gear oil on schedule, check the anodes, flush with fresh water after use in salt water and replace the water pump impeller every few seasons. Our Mercury maintenance guide sets out a typical schedule, and official specifications are on Mercury Marine’s website.
Frequently Asked Questions
What is in the 2020 Mercury SeaPro 300XXL pair category?
This category groups the listings shown below. Each product page has full specifications, the model code explained and buying advice.
Can I use these engines in salt water?
Yes. Flush with fresh water after each saltwater trip and check the anodes regularly.
How often do they need servicing?
Most outboards need a full service every 100 hours or once a year, whichever comes first. Follow the owner’s manual for the exact schedule.
What comes with each engine?
Supply varies by listing. Check the product page or contact us before you order.
Compare the full Mercury outboard range, read our shipping policy, or contact us if you need help choosing the right model.


