Browse our Yamaha 200 HP outboard motors: 8 models of high-horsepower Yamaha four-strokes for offshore boats and multi-engine rigs.
Yamaha 200 HP Outboard Motors Available
Each listing has full specifications, the model code explained and buying advice. Current prices are shown on each product page.
- Yamaha 200 HP F200LB: 20 in shaft shaft, mechanical controls
- Yamaha 200 HP F200LCA: 20 in shaft shaft, yamaha digital electronic control controls
- Yamaha 200 HP F200XB: 25 in shaft shaft, mechanical controls
- Yamaha 200 HP F200XCA: 25 in shaft shaft, yamaha digital electronic control controls
- Yamaha 200 HP LF200LCA: 20 in shaft shaft, yamaha digital electronic control controls
- Yamaha 200 HP LF200XB: 25 in shaft shaft, mechanical controls
- Yamaha 200 HP LF200XCA: 25 in shaft shaft, yamaha digital electronic control controls
- VF200LA V MAX SHO: 20 in shaft shaft, mechanical controls
Yamaha 200 HP Outboard Motors: Engine and Key Specifications
These Yamaha 200 HP models use a 2,785 cc (2.8 L) inline 4-cylinder, DOHC 16-valve with variable camshaft timing. At 200 HP per engine, these outboards are built for sustained high load, strong charging output and smooth power offshore.
- Shaft lengths: 20 in, 25 in
- Rotation: standard rotation
- Control options: remote; mechanical; yamaha digital electronic control
How to Choose Yamaha 200 HP Outboard Motors
Start with your boat’s capacity plate, which states the maximum horsepower and engine weight the hull is rated for. Then match the shaft length to your transom height, measured from the top of the transom to the bottom of the hull on the centreline; our long shaft vs short shaft guide shows how. Decide on controls early: digital controls make multi-engine rigging smoother, while mechanical controls keep costs down on a single-engine boat. Finally, choose the right propeller with our propeller buying guide.
Who Yamaha 200 HP Outboard Motors Suit
Yamaha 200 HP outboards are a good match for offshore center consoles, walkarounds and twin-engine rigs. They suit owners who run offshore, carry heavy loads or want the redundancy of a twin installation. Our guide on how to choose an outboard motor walks through the main decisions, and our Yamaha outboard buying guide covers the whole range.
Comparing Yamaha 200 HP Outboard Motors With Other Brands
The leading outboard makers all build reliable engines in this power class, so the best choice often comes down to dealer and parts support where you boat, the controls and gauges already on your boat, weight, and the features you value most. If you want to compare, we also stock Suzuki 200 HP outboards, Mercury 200 HP outboards, Honda 200 HP outboards. Our outboard brands comparison sets out the main differences between manufacturers.
Rigging, Fuel Economy and Running Costs
Budget for more than the engine itself. Remote-control engines need controls, steering, gauges, a heavy-duty marine battery and professional rigging, which can add noticeably to the cost of a repower. Modern four-strokes are far more economical than older two-strokes, and you can cut fuel use further by trimming the boat correctly, keeping the hull clean, matching the propeller to the load and cruising just above planing speed rather than at full throttle. If you are replacing an older engine, our repower cost guide helps you plan the whole job.
Owning and Maintaining Your Yamaha Outboard
Every new engine needs a careful break-in; follow the owner’s manual and our outboard break-in guide. After that, regular servicing keeps it reliable: change the engine oil and gear oil on schedule, check the anodes, flush with fresh water after use in salt water and replace the water pump impeller every few seasons. Our Yamaha maintenance guide sets out a typical schedule, and official specifications are on Yamaha Outboards’s website.
Frequently Asked Questions
Which of our Yamaha 200 HP outboard motors should I choose?
Choose the shaft length that matches your transom, then the control type and starting method that suit your boat. Each listing explains its model code, so you can compare versions side by side.
Can I use a Yamaha 200 HP outboard in salt water?
Yes. Flush the engine with fresh water after each saltwater trip and check the anodes regularly.
How often do these engines need servicing?
Most need a first service after break-in, then a full service every 100 hours or once a year, whichever comes first. Check the Yamaha owner’s manual for the exact schedule.
What comes with each engine?
Supply varies by model, for example whether a propeller, controls or fuel tank is included. Check the listing or contact us before you order.
Compare the full Yamaha outboard range, read our shipping policy, or contact us if you need help choosing the right model.









