Yamaha F40LA 40 hp outboard motor
SPECIFICATIONS
- Engine Type: 3 cyl
- Displacement: 747cc
- Bore x Stroke: 65 x 75mm (2.56 x 2.95 in.)
- Prop Shaft Horsepower: 40hp at 5500rpm
- Full Throttle RPM Range: 5000 ~ 6000 rpm
- Alternator Output at W.O.T.: 17 Amp
- Compression Ratio: 9.4:1
- Fuel Induction System: EFI
- Weight*: 97 kg (214 lbs) – 101kg (223 lbs)
- Recommended Fuel: Octane 87
- Recommended Engine Oil: Yamalube® 4M (See owner’s manual)
- Recommended Fuel Filtration: Yamaha 10-Micron Fuel/Water Separating Filter (external)
- C.A.R.B. Rating: 2-Star
- Exhaust: Through Propeller
- Intake: 6
- Ignition: CDI Microcomputer
- Spark Plug: DPR6EB-9
- Alternator Output: 17 Amp
- Starting System: Electric
- Lubrication: Wet Sump
- Engine Oil Capacity: 1.7L/1.5L
- Recommended Cooling: Thermostatic Control
- Ethanol Blend Limit: 10% Maximum
- Gear Ratio: 2.00:1
- Gear Shift: Forward, Neutral, Reverse
- Shaft Length: 20″
- Degree of Tilt: 20°
- Degree of Trim: -3° through +20°
- Dry Weight: 97 kg (214 lbs) – 101kg (223 lbs)
- Steering Angle (maximum): 40° from center, either direction
Yamaha F25SWHC 25 hp 15 outboard motor
CONVENIENCE & CONTROL
- Max Maneuverability: A 45-degree steering angle in each direction means great maneuvering potential.
- Easy Engine Flushing: A Freshwater Flush Device allows you to flush the engine without running it, for added convenience and extended engine life.
- Portability and Storage: Incredible light weights, built-in resting pads and carry handles, an easy oil retention system and an optional folding tiller handle, allow for easy carrying and on-side storage without oil leakage or cowling scuffs.
MODEL SPECIFIC FEATURES
- Available for remote mechanical or tiller-handle control
- Only 126 pounds (15” shaft model)
- Available in 15” and 20” shaft lengths and in a High-Thrust design (T25)
- Powerful 16-amp alternator
- Variable Trolling RPM Switch (VTS®) is standard on factory-equipped tiller handles, and available with our Multi-Function Tiller Handle, a Command Link® tachometer or dash mounted VTS switch
- Select models – including 15-inch shafts – now feature a shorter, factory-installed tiller with Power Trim & Tilt and a tilt-up feature for ease in small spaces
SPECIFICATIONS
- Engine Type: 2 cyl
- Displacement: 432cc
- Bore x Stroke: 65 x 65.1mm / (2.56 x 2.56 in)
- Prop Shaft Horsepower: 25 hp at 5500 rpm
- Full Throttle RPM Range: 5000 – 6000
- Alternator Output at W.O.T.: 16 amp
- Compression Ratio: 9.3:1
- Fuel Induction System: EFI
- Weight †: 57kg (126 lbs)
- Recommended Fuel: Octane 87
- Recommended Engine Oil: Yamalube® 4M (See owner’s manual)
- Recommended Fuel Filtration: Yamaha 10-Micron Fuel/Water Separating Filter (external)
- C.A.R.B. Rating: 2-Star
- Exhaust: Through Propeller
- Intake: 4
- Ignition: CDI Microcomputer
- Spark Plug: DPR6EB-9
- Alternator Output: 16 Amp
- Starting System: Electric & Manual
- Lubrication: Wet Sump
- Engine Oil Capacity: 1.1L/1.0L
- Recommended Cooling: Thermostatic Control
- Ethanol Blend Limit: 10% Maximum
- Gear Ratio: 2.00:1
- Gear Shift: Forward, Neutral, Reverse
- Shaft Length: 15″
- Degree of Tilt: 62° – 63°
- Degree of Trim: -3° through +16°
- Dry Weight: 15″ shaft / 57kg (126 lbs)
- Steering Angle (maximum): 45° from center, either direction
- Warranty: Limited 3-year Pleasure, 3-year Government, 1-Year Commercial
NOTES:
† Weight refers to shortest shaft length, and is measured without motor oil, gearcase oil and propeller (except models 25 hp and under, which include a standard propeller). All Jet model weights include the jet pump assembly (weight estimated).
2023 Yamaha 40hp Jet Outboard | F40JEHA
MOTOR SPECIFICATIONS
-
- Engine Type: Yamaha F40JEHA Jet Four Stroke
- Horsepower: 30hp Jet Drive
- Cylinders: 3 cyl
- Shaft Length: 20″ Long
- Steering: Tiller
- Starter: Electric
- Weight: 227 lbs
- Alternator Output: 16 amp
- Degree of Tilt: 65°
- Degree of Trim: -4° through +16°
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
STANDARD FEATURES
-
- Nitro-Assist Tilt
- Jet Lower Unit
- Fuel Line
- Safety Lanyard
- Owner’s Manual
2019 Yamaha 200 HP LF200XCA Outboard Motor
Specifications
Displacement 2785cc (2.8L) Bore x Stroke 96 x 96.2mm (3.78 x 3.79in) Prop Shaft Horsepower 200 hp @ 5500 rpm Compression Ratio 10.3:1 Fuel Induction EFI (DOHC) Exhaust Through Propeller Intake Single Throttle Valve Ignition TCI Microcomputer Spark Plug LFR6A-11 Alternator Output 50 Amp Starting System Electric with Power Trim & Tilt Lubrication Wet Sump Engine Oil Capacity 4.5L/4.3L w/without filter Full Throttle RPM Range 5000 ~ 6000 rpm Cooling Thermostatic Control Recommended Engine Oil Yamalube® 4M (See owner’s manual) Recommended Fuel Regular Unleaded (Minimum Pump Octane 89) Recommended Fuel Filtration Yamaha 10 Micron Fuel/Water Separating Filter (external) Ethanol Blend Limit 10% Maximum Gear Ratio (26:14) 1.86:1 Gear Shift Forward, Neutral, Reverse Shaft Length L=20″ X=25″ Degree of Tilt 70° Degree of Trim -4° through +16° C.A.R.B. Rating 3-Star Dry Weight 221 kg (487 lb) Mounting Centers 26″ Steering Angle (maximum) 32° from center, either directionFilter by price
S.H Continental Marine
USA: B.L Business LLC
Thailand: Dethai Products 1989 Co.,ltd
Our team is dedicated to providing exceptional customer service.
Email: info@shcontinentalmarine.com
Choose S.H Continental Marine (Dethai Products 1989 Co.,ltd)
for your outboard engine needs and enjoy superior quality, exceptional customer service, and unbeatable prices.
Need Help?
+1 (650) 525 4464
Monday – Friday 8:00am-6:00pm (GMT-08:00) Pacific Standard Time (Los Angeles).
Email: info@shcontinentalmarine.com
Address: 948 W Patapsco Ave, Baltimore, MD 21230
S.H Continental Marine
- Free delivery
- Best of all offers
Copyright 2025.KlbTheme . All rights reserved