2019 YAMAHA 30 HP F30LEHA OUTBOARD MOTOR
Specifications
- Engine Type: Yamaha F30LEHA Four Stroke
- Horsepower: 30 hp
- Cylinders: 3 cyl
- Shaft Length: 20″
- Steering: Tiller
- Starter: Electric
- Weight: 223 lbs
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Induction System: EFI
Add to Wishlist
Add to Wishlist
Specifications
- Engine Type: Yamaha F30LA Four Stroke
- Horsepower: 30 hp
- Cylinders: 3 cyl
- Shaft Length: 20″
- Steering: Remote Mech
- Starter: Electric
- Weight: 214 lbs
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Induction System: EFI
Add to Wishlist
Add to Wishlist
2020 YAMAHA 2.5 HP F2.5SMHB OUTBOARD MOTOR
Power/Performance- Streamlined Intake Manifold
- Long Span Mounting System
- Four Stroke Engine Design
- California C.A.R.B. Ultra Low Emissions 3 Star Rating
- Meets all current Federal EPA Emission Standards
- Overhead Valve (OHV) Design
- 2-Valves Per Cylinder
- Precise Carburetor Setting
- Short Stroke Engine Design
- Rubber Dampened Tiller Handle
- Compact Offset Crankshaft
- Phaze Five™ Paint System
- Stainless Steel Driveshaft, Prop Shaft, Shift Shaft and Steering Tube
- Sacrificial Anodes
- Splined Prop Shaft
- TCI Ignition
- Splash Lubrication
- YDC Aluminum Alloy
- Cast Iron Camshaft
- Water Resistant Fuel Tank Cap
- Dual Transom Clamps
- Multiple Gripping Points
- Decompression Device
- Built-In Fuel Tank
- 360° Swivel Steering
- F/N Shift
- Tilt Up Engine Stopping Device
- Pilot Water Blocking Device
- Split Bottom Cowling
Add to Wishlist
Add to Wishlist
2020 YAMAHA 2.5 HP F2.5LMHB OUTBOARD MOTOR2.5
NEW YAMAHA 2.5 LMHB FOUR STROKE MOTOR Engine Type One Cylinder Displacement 4.4 ci (72 cc) Bore x Stroke 54 x 31.5mm (2.13 x 1.24 in) Prop Shaft Horsepower 2.5 hp @ 5500 rpm Compression Ratio 8.8:1 Fuel Induction Overhead Valve Exhaust Above Propeller Intake Carburetor Ignition TCI Spark Plug CR6HSB-000-000 Alternator Output N.A. Starting System Manual Engine Oil Capacity 0.35L(0.37qt) Full Throttle RPM Range 5250 ~ 5750 rpm Cooling Water/Thermostatic Control Recommended Engine Oil Yamalube® 4M (See Owner’s Manual) Recommended Fuel Regular Unleaded (Minimum Pump Octane 87) Recommended Fuel Filtration Yamaha Mini 10-Micron Fuel/Water Separating Filter (external) Gear Ratio 2.01:1 Gear Shift Forward, Neutral Shaft Length S=15″, L=20″ Degree of Tilt 79° Degree of Trim 4 positions C.A.R.B. Rating 3-Star Dry Weight F2.5SMHB = 17kg (37 lbs), F2.5LMHB = 18kg (40 lbs) Steering Angle (maximum) 360° from center, either direction
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
2024 Yamaha Jet Drive 30HP
Yamaha Jet Drive 30HP – 15, 20, 25, 30, 35, 40″ Shaft
Yamaha’s Jet Drive four strokes, can boldly go where no propped outboard would dare. Shallows. Rocky-bottom rivers. Shoals. White-water rapids. They’d all prove treacherous for a propeller-driven outboard, but a jet drive is all over it. Prop-free, you can “off-road” without worrying about breaking a prop on rocks and other underwater obstructions. So, while you may be giving up the prop, you’re gaining a whole lot of freedom, with powerful, fuel efficient Yamaha Jet Drives available in 150, 115, 90, 60 and 40 horsepower.SPECIFICATIONS
- Engine Type: 3 cyl
- Displacement: 747cc
- Shaft Length : 15″, 20″ 25″ and “30
- Bore x Stroke: 65 x 75 mm (2.56 x 2.95 in)
- Prop Shaft Horsepower: 30hp @ 5500rpm
- Full Throttle RPM Range: 5000 ~ 6000 rpm
- Alternator Output at W.O.T.: 16 Amp
- Compression Ratio: 9.4:1
- Fuel Induction System: EFI
- Weight *: 99 kg (219lbs) – 103 kg (227 lbs)
- Recommended Fuel: Octane 87
- Recommended Engine Oil: Yamalube® 4M (See owner’s manual)
- Recommended Fuel Filtration: Yamaha 10-Micron Fuel/Water Separating Filter (external)
- C.A.R.B. Rating: 2-Star
- Exhaust: Through Jet Nozzle
- Intake: 6
- Ignition: CDI Microcomputer
- Spark Plug: DPR6EB-9
- Starting System: Electric
- Lubrication: Wet Sump
- Engine Oil Capacity: 1.7L/1.5L
- Recommended Cooling: Thermostatic Control
- Ethanol Blend Limit: 10% Maximum
- Gear Ratio: Direct Drive
- Gear Shift: Forward, Neutral, Reverse
- Shaft Length: Fits 20″ Transom
- Degree of Tilt: 65°
- Degree of Trim: -4° through +16°
- Mounting Centers: N/A
- Steering:
- Steering Angle (maximum): 40° from center, either direction
Add to Wishlist
Add to Wishlist
2024 Yamaha 30hp Outboard | F30LA | Jet Drive
Add to cart
The Yamaha 30hp Midrange four strokes are known for their small size and solid performance. Light and powerful, these nimble, three-cylinder wonders are perfect for light duty on skiffs, jons and inflatables and small pontoons or aluminum fishing boats. With single-overhead camshafts and electronic fuel injection, they deliver quick starts, responsive power, quiet operation and valuable efficiency. These 747cc 30hp midrange outboards boasts a streamlined design and solid performance. At just 214 pounds, it’s suitable for lightweight craft such as aluminum fishing boats and inflatables.
KEY FEATURES
Control and Comfort: Yamaha’s optional, award-winning Multi-Function Tiller handle features a Variable Trolling RPM Switch (VTS). It allows for precision trolling speed adjustments in 50-RPM increments. Compatible with all Midrange models. Easy Engine Flushing: A Freshwater Flush Device allows you to flush the engine without running it, for added convenience and extended engine life. Power Trim and Tilt: Power trim and tilt models provide a trim range of -3 up to +20 degrees. This brings the bow of the boat up, for better hole shot and top speed and a smoother ride. Reliability and Durability: Combined with Yamaha’s proprietary alloy (YDC-30), their exclusive Phaze Five™ anti-coorosive pain system provides a tough, five-layer barrier against corrosion. This protection is standard on all Yamaha Midrange four-stroke engines.MOTOR SPECIFICATIONS
-
- Engine Type: Yamaha F30LA Four Stroke
- Horsepower: 30hp
- Cylinders: 3 cyl
- Shaft Length: 20″ Long
- Steering: Remote Mechanical
- Starter: Electric
- Weight: 214 lbs
- Alternator Output: 17 amp
- Degree of Tilt: 65°- 66°
- Degree of Trim: -3° through +20°
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
STANDARD FEATURES
-
- Power Trim & Tilt
- Steering Link Arm
- Fuel Line
- Owner’s Manual
Add to Wishlist
Add to Wishlist
2023 Yamaha Jet Drive 30HP
Yamaha Jet Drive 30HP – 15, 20, 25, 30, 35″ Shaft
Yamaha Jet Drive 30HP – 15, 20, 25, 30, 35″ Shaft, four stroke produces 30 hp at the pump. Its compact, light-weight SOHC three-cylinder, in-line design features a long-track induction system and a single throttle valve. This creates compact, light-weight power and improves throttle response.
- Compatible with mechanical controls, our Multi-Function Tiller Handle, analog gauges and Command Link®
- 219 pounds (including jet pump assembly)
- Fits 20-inch transom boats
- Solid 16-amp alternator
- Nitro Assist Tilt
Basic Info
Model:F40 Jet
Year:2019,20,21,22,23,24
Condition:New
Category:Jet
Technical Details
Power:30 HP
RPM:5500
Fuel:Gasoline
Number Cylinders:3
Descriptions
Fuel Induction System:EFI
Starting System:Electric
Ignition System:CDI Microcomputer
Lubrication System:Wet Sump
Measurements
Bore:2.56 in
Weight:219 lb
Weight Type:Dry
Stroke:2.95 in
Alternator Output:16 Volts
Shaft Length : 15″, 20″ 25″ and “30
Add to Wishlist
Add to Wishlist
2023 Yamaha 30hp High Thrust Outboard | T25LWTC
The Yamaha 30hp Midrange four strokes are known for their small size and solid performance. Light and powerful, these nimble, three-cylinder wonders are perfect for light duty on skiffs, jons and inflatables and small pontoons or aluminum fishing boats. With single-overhead camshafts and electronic fuel injection, they deliver quick starts, responsive power, quiet operation and valuable efficiency. These 747cc 30hp midrange outboards boasts a streamlined design and solid performance. At just 214 pounds, it’s suitable for lightweight craft such as aluminum fishing boats and inflatables.
KEY FEATURES
Control and Comfort: Yamaha’s optional, award-winning Multi-Function Tiller handle features a Variable Trolling RPM Switch (VTS). It allows for precision trolling speed adjustments in 50-RPM increments. Compatible with all Midrange models. Easy Engine Flushing: A Freshwater Flush Device allows you to flush the engine without running it, for added convenience and extended engine life. Reliability and Durability: Combined with Yamaha’s proprietary alloy (YDC-30), their exclusive Phaze Five™ anti-coorosive pain system provides a tough, five-layer barrier against corrosion. This protection is standard on all Yamaha Midrange four-stroke engines.MOTOR SPECIFICATIONS
-
- Engine Type: Yamaha F30LEHA Four Stroke
- Horsepower: 30hp
- Cylinders: 3 cyl
- Shaft Length: 20″ Long
- Steering: Tiller
- Starter: Electric
- Weight: 223 lbs
- Alternator Output: 17 amp
- Degree of Tilt: 65°- 66°
- Degree of Trim: -3° through +20°
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
STANDARD FEATURES
-
- Nitro-Assist Tilt
- Fuel Line
- Safety Lanyard
- Owner’s Manual
Add to Wishlist
Add to Wishlist
2024 Yamaha Jet Drive 40HP
Yamaha Jet Drive 40HP – 15, 20, 25, 30, 35″ Shaft
Yamaha Jet Drive 30HP – 15, 20, 25, 30, 35″ Shaft, four stroke produces 30 hp at the pump. Its compact, light-weight SOHC three-cylinder, in-line design features a long-track induction system and a single throttle valve. This creates compact, light-weight power and improves throttle response.
- Compatible with mechanical controls, our Multi-Function Tiller Handle, analog gauges and Command Link®
- 219 pounds (including jet pump assembly)
- Fits 20-inch transom boats
- Solid 16-amp alternator
- Nitro Assist Tilt
Basic Info
Model:F40 Jet
Year:2019,20,21,22,23,24
Condition:New
Category:Jet
Technical Details
Power:40 HP
RPM:5500
Fuel:Gasoline
Number Cylinders:3
Descriptions
Fuel Induction System:EFI
Starting System:Electric
Ignition System:CDI Microcomputer
Lubrication System:Wet Sump
Measurements
Bore:2.56 in
Weight:219 lb
Weight Type:Dry
Stroke:2.95 in
Alternator Output:16 Volts
Shaft Length : 15″, 20″ 25″ and “30
Add to Wishlist
Add to Wishlist
2024 Yamaha Jet Drive 40HP
Yamaha Jet Drive 40HP – 15, 20, 25, 30, 35″ Shaft
Yamaha Jet Drive 30HP – 15, 20, 25, 30, 35″ Shaft, four stroke produces 30 hp at the pump. Its compact, light-weight SOHC three-cylinder, in-line design features a long-track induction system and a single throttle valve. This creates compact, light-weight power and improves throttle response.
- Compatible with mechanical controls, our Multi-Function Tiller Handle, analog gauges and Command Link®
- 219 pounds (including jet pump assembly)
- Fits 20-inch transom boats
- Solid 16-amp alternator
- Nitro Assist Tilt
Basic Info
Model:F40 Jet
Year:2019,20,21,22,23,24
Condition:New
Category:Jet
Technical Details
Power:40 HP
RPM:5500
Fuel:Gasoline
Number Cylinders:3
Descriptions
Fuel Induction System:EFI
Starting System:Electric
Ignition System:CDI Microcomputer
Lubrication System:Wet Sump
Measurements
Bore:2.56 in
Weight:219 lb
Weight Type:Dry
Stroke:2.95 in
Alternator Output:16 Volts
Shaft Length : 15″, 20″ 25″ and “30
Add to Wishlist
Add to Wishlist
2023 Yamaha Yamaha F60LB 60 hp
2023 Yamaha Yamaha F60LB, 60 hp, 4 stroke, trim & tilt
2023 Yamaha Yamaha F60LB 60 hp, Our 1-liter 60-hp midrange offers light weight and exhilarating performance. A dynamite choice for the inshore angler, it gives you the option of dialing in trolling speeds in precise, 50-RPM increments. Depending on your gauge and control preference, the F60 allows you to access to our Variable Trolling RPM Switch (VTS®) via our Multi-Function Tiller Handle, Command Link® Tachometer or a helm-mounted remote VTS switch.
POWER & PERFORMANCE
- Single Overhead Camshaft: A Single Overhead Camshaft (SOHC) on the F70, F60 and F50 provides a compact, lightweight, space-saving design.
- Fuel Economy: Precision Multi-Point Electronic Fuel Injection delivers the exact amount of fuel needed for optimum performance and efficiency. Yamaha’s EFI optimizes fuel atomization further enhancing fuel economy.
- Powerful Hole Shot: A Composite Intake Manifold features long tube intake tracks, tuned to increase airflow, which boost low-end and midrange torque. This means a more powerful hole shot and increased acceleration. Even with all this responsive power, an air silencer box and surge tank reduce air intake noise and air turbulence for smooth, quiet operation.
- Optimum Performance: A TCI microcomputer ignition adjusts timing to maintain optimal engine performance, economy and power under all operating conditions.
- Precise Throttle Control: All air entering the engine block is routed through a single throttle valve, to ensure the precise amount of air necessary for optimum power and fuel efficiency. It then enters each cylinder through individual long intake tracks, which are ‘pulse tuned’ to provide air at the precise volume and timing for maximum density and power.
RELIABILITY & DURABILITY
- Corrosion Protection: Combined with our proprietary alloy (YDC-30), our exclusive Phaze Five™ electro-deposited, anti-corrosive paint system provides a tough, five-layer barrier against corrosion. This protection is standard on all the Yamaha Midrange 70-, 60- and 50-horsepower four strokes.
- Engine Warning System: This system protects the outboard with a range of functions including: overheat protection and low-oil-pressure warning (automatically reducing maximum RPM to 2000), over-rev protection, water-in-fuel detection, start-in-gear protection and shift-in prevention at open throttle.
- Wet Sump: The F70, F60 and F50 use a pressurized oil delivery system and incorporate a compact and durable oil pump to keep all of the moving parts of their SOHC systems lubricated and running smoothly for maximum reliability.
- Magnetic Drain Plug: Located in the lower unit to remove metal particles from the gear oil and prevent gearcase damage.
CONVENIENCE & CONTROL
- Control and Comfort: Our optional, award-winning Multi-Function Tiller handle features a Variable Trolling RPM Switch (VTS®). It allows for precision trolling speed adjustments in 50-RPM increments. Compatible with all Midrange models.
- Easy Engine Flushing: A Freshwater Flush Device allows you to flush the engine without running it, for added convenience and extended engine life.
- Gauge Compatibility: Optional Command Link® gauges provide real-time outboard performance, boat systems and environmental data at your fingertips. Streamlined displays are designed to withstand the elements and are available in square or round style for single- or multi-engine applications.
MODEL SPECIFIC FEATURES
- Available for mechanical remote or tiller control
- Only 247 pounds
- Available in a 20” shaft
- Powerful 16-amp alternator
- Optional Variable Trolling RPM Switch (VTS®)
- Available in a T60 High-Thrust model for heavy loads and an F60 Jet-Pump model for shallow water (F60 Jet model produces 40 horsepower at the jet pump nozzle)
SPECIFICATIONS
- Engine Type: i4
- Displacement: 1.0L
- Bore x Stroke: 65 x 75mm (2.56 x 2.95 in.)
- Prop Shaft Horsepower: 60hp at 5500rpm
- Full Throttle RPM Range: 5000 ~ 6000 rpm
- Alternator Output at W.O.T.: 16 amp
- Compression Ratio: 9.5:1
- Fuel Induction System: EFI
- Weight*: 112 kg (247 lbs)
- Recommended Fuel: Octane 87
- Recommended Engine Oil: Yamalube® 4M (See owner’s manual)
- Recommended Fuel Filtration: Yamaha 10-Micron Fuel/Water Separating Filter (external)
- C.A.R.B. Rating: 3-Star
- Exhaust: Through Propeller
- Intake: 8
- Ignition: TCI Microcomputer
- Spark Plug: DPR6EB-9
- Alternator Output: 16 Amps
- Starting System: Electric
- Lubrication: Wet Sump
- Engine Oil Capacity: 2.1/1.9L
- Recommended Cooling: Thermostatic Control
- Ethanol Blend Limit: 10% Maximum
- Gear Ratio: 1.85:1
- Gear Shift: Forward, Neutral, Reverse
- Shaft Length: 20″
- Degree of Tilt: 69°
- Degree of Trim: -4° through +16°
- Dry Weight: 112 kg (247 lbs)
- Steering Angle (maximum): 40° from center, either direction
Add to Wishlist
Add to Wishlist
S.H Continental Marine
Our team is dedicated to providing exceptional customer service.
Email: info@shcontinentalmarine.com
Choose S.H Continental Marine for your outboard engine needs and enjoy superior quality, exceptional customer service, and unbeatable prices.
Need Help?
+1 (650) 525 4464
Monday – Friday 8:00am-6:00pm (GMT-08:00) Pacific Standard Time (Los Angeles).
Email: info@shcontinentalmarine.com
Address: 948 W Patapsco Ave, Baltimore, MD 21230
S.H Continental Marine
- Free delivery
- Best of all offers
Copyright 2022.KlbTheme . All rights reserved