Suzuki 4 HP DF4AS5 Outboard Motor
The Suzuki 4hp outboard motor model DF4AS5 is perfect for canoes, small fishing boats, and small to medium sized tenders and inflatables. The 4 hp Suzuki outboard boasts the largest displacement of any one cylinder outboard in this hp class. A full-size twist grip throttle, tiller steering, forward-neutral-reverse gear shift with large easy-to-use shift lever, 15 inch shaft, digital CDI ignition and integral fuel tank are just a few of the features you’ll find standard on the 4hp.
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
2019 SUZUKI 4 HP DF4AS2 OUTBOARD MOTOR
The Suzuki 4hp outboard motor model DF4AS2 is perfect for canoes, small fishing boats, and small to medium sized tenders and inflatables. The 4 hp Suzuki outboard boasts the largest displacement of any one cylinder outboard in this hp class. A full-size twist grip throttle, tiller steering, forward-neutral-reverse gear shift with large easy-to-use shift lever, 15 inch shaft, digital CDI ignition and integral fuel tank are just a few of the features you’ll find standard on the 4hp.- Compact and Lightweight Design
- 3 Way Storage: Stbd, Port, or Front
- Saltwater Rated
- Multi-Layer Corrosion Protection
- Quiet Below-the-Water Exhaust
- Fold-Down Tiller Handle
- Rubber Mount Bracket System
- Twist-Grip Throttle with Tensioner
- Large Carrying Handle
- Large Gear Shift Lever
- Digital CDI Ignition for Quick Starting
- 3-Star Ultra-Low Emission Rating
- Shallow Water Drive (2 positions)
- 5 Trim Positions w/Tilt Lock Pin
- Over-Rev Limiter Protection
- Throttle Tension Control
- Steering Friction Tension Control
- 90° Left / Right Turning for Tight Spots
- Emergency Lanyard Stop Switch
- Built-in .26 Gal. Fuel Tank (45 min. @ WOT)
- 3-Blade Aluminum Propeller
| MODEL | DF4AS2 |
|---|---|
| SKU | DF4AS2-20 |
| WEIGHT | 52.0 lb |
| MANUFACTURER | Suzuki |
| COUNTRY OF MANUFACTURE | Thailand |
| HORSEPOWER | 4hp |
| SHAFT LENGTH | 15″ (Short) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | Internal |
| CYLINDER(S) | 1 |
| DISPLACEMENT | 138 cc (8.4 cubic inches) |
| BORE AND STROKE | 2.38 x 1.89 inches |
| FULL THROTTLE RPM RANGE | 4000-5000 RPM |
| IGNITION SYSTEM | Digital Capacitor Discharge Ignition System |
| INDUCTION SCAVENGING | OHV |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | Unleaded Gasoline (87 octane) |
| FUEL TANK / FUEL LINE | .26 US Gallon Integral Fuel Tank |
| OIL TYPE | SAE 10W-30 or SAE 10W-40 |
| OIL CAPACITY | 24 fl oz. (700 mL) |
| LUBRICATION | Wet Sump |
| ALTERNATOR | Optional 12V 5A (installation required) |
| COOLING SYSTEM | Water-Cooled |
| SALTWATER RATED | Yes |
| GEAR RATIO | 1.92:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (starboard side lever) |
| PROPELLER | 3-Blade Aluminum 7.5″ Dia. x 6.5″ Pitch |
Add to Wishlist
Add to Wishlist
2020 Mercury 200XL Pro XS DTS
Engine
Engine Type: V-8
Bore x Stroke: 3.6 in. x 3.4 in. (92 mm x 86 mm)
Displacement: 4.6 L
Starting: Electric Start with SmartStart Protection
Dimensions
Shaft Length: 25 in. (635 mm)
Weight: 505 lb. (229 kg)
General
Trim Method: Power trim and tilt
Propshaft Horsepower: 200 hp (149 kW)
Full Throttle Operating Range: 5600-6200 rpm
Gear Ratio / Shift: 1.75:1 / F-N-R
Fuel Induction: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
Alternator: 85 Amp / 1071 Watt with Idle Charge
Cooling: Water-cooled with thermostat
Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
Features
- Engine Details: Maximized power, torque and overall performance for spectacular acceleration and top speed. Great for bass and multi-species fishing boats.
- Take it to the Limit: No outboard gets from zero to wide-open quicker than a Mercury Pro XS, now with V8 4.6-liter and V6 3.4-liter muscle. This is performance that will rocket your rig out of the hole and to the next hot spot in a blur. These Pro XS models feature generous displacement in a performance-tuned powerhead with a deep-breathing double-overhead-cam design and long-runner intake tract that delivers instant throttle response at any speed.
- Discover better boating: Active Trim by Mercury makes boating easier and more enjoyable by automatically trimming your engine. Active Trim simplifies boat operation while improving engine performance and decreasing fuel costs.
Specifications
- HP / kW: 200 / 149
- Engine type: V-8
- MidSection: Conventional MidSection
- Displacement (CID/CC): 279 CID
- Displacement (L): 4.6L
- Cylinder Configuration: V-8 [64 degree] with Dual Overhead Cam [DOHC] and 32-valves
- Full throttle RPM: 5600-6200
- Air induction: Performance-Tuned Long-Runner Intake Manifold
- Fuel induction system: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
- Alternator amp / Watt: 85-amp (1071 Watt) with Idle Charge
- Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum
- Recommended oil: NMMA Certified FCW SAE 10W-30
- Engine protection operator warning system: SmartCraft Engine Guardian
- Compatible with SmartCraft digital technology: Yes
- Starting: Electric Start with SmartStart Protection
- Controls: Remote Mechanical or Digital Throttle & Shift (DTS)
- Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
- Shaft length: 25″ / 635 mm
- Gearcase ratio: 1.75:1
- Dry weight: 505 lbs / 229 kgs
- CARB star rating: 3
- Bore and stroke: 3.6 in x 3.4 in / 92 mm x 86 mm
- Ignition: SmartCraft PCM 112 Digital Inductive
- Cooling system: Water-cooled with thermostat
- Gear shift: F-N-R
- Gearcase options: 5.44″
- Trim system: Power trim and tilt
- Exhaust system: Through prop
- Color: Phantom Black
- Lubrication system: Wet sump
- Oil Capacity: 7.0 Quarts / 6.6 Liters
- Maximum Trim Range: 20° (-6° to 14°)
- Maximum Tilt Range: 73° (-6° to 67°)
Add to Wishlist
Add to Wishlist
2020 Mercury 200XL Pro XS
Engine
Engine Type: V-8
Bore x Stroke: 3.6 in. x 3.4 in. (92 mm x 86 mm)
Displacement: 4.6 L
Starting: Electric Start with SmartStart Protection
Dimensions
Shaft Length: 25 in. (635 mm)
Weight: 505 lb. (229 kg)
General
Trim Method: Power trim and tilt
Propshaft Horsepower: 200 hp (149 kW)
Full Throttle Operating Range: 5600-6200 rpm
Gear Ratio / Shift: 1.75:1 / F-N-R
Fuel Induction: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
Alternator: 85 Amp / 1071 Watt with Idle Charge
Cooling: Water-cooled with thermostat
Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
Features
- Engine Details: Maximized power, torque and overall performance for spectacular acceleration and top speed. Great for bass and multi-species fishing boats.
- Take it to the Limit: No outboard gets from zero to wide-open quicker than a Mercury Pro XS, now with V8 4.6-liter and V6 3.4-liter muscle. This is performance that will rocket your rig out of the hole and to the next hot spot in a blur. These Pro XS models feature generous displacement in a performance-tuned powerhead with a deep-breathing double-overhead-cam design and long-runner intake tract that delivers instant throttle response at any speed.
- Discover better boating: Active Trim by Mercury makes boating easier and more enjoyable by automatically trimming your engine. Active Trim simplifies boat operation while improving engine performance and decreasing fuel costs.
Specifications
- HP / kW: 200 / 149
- Engine type: V-8
- MidSection: Conventional MidSection
- Displacement (CID/CC): 279 CID
- Displacement (L): 4.6L
- Cylinder Configuration: V-8 [64 degree] with Dual Overhead Cam [DOHC] and 32-valves
- Full throttle RPM: 5600-6200
- Air induction: Performance-Tuned Long-Runner Intake Manifold
- Fuel induction system: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
- Alternator amp / Watt: 85-amp (1071 Watt) with Idle Charge
- Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum
- Recommended oil: NMMA Certified FCW SAE 10W-30
- Engine protection operator warning system: SmartCraft Engine Guardian
- Compatible with SmartCraft digital technology: Yes
- Starting: Electric Start with SmartStart Protection
- Controls: Remote Mechanical or Digital Throttle & Shift (DTS)
- Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
- Shaft length: 25″ / 635 mm
- Gearcase ratio: 1.75:1
- Dry weight: 505 lbs / 229 kgs
- CARB star rating: 3
- Bore and stroke: 3.6 in x 3.4 in / 92 mm x 86 mm
- Ignition: SmartCraft PCM 112 Digital Inductive
- Cooling system: Water-cooled with thermostat
- Gear shift: F-N-R
- Gearcase options: 5.44″
- Trim system: Power trim and tilt
- Exhaust system: Through prop
- Color: Phantom Black
- Lubrication system: Wet sump
- Oil Capacity: 7.0 Quarts / 6.6 Liters
- Maximum Trim Range: 20° (-6° to 14°)
- Maximum Tilt Range: 73° (-6° to 67°)
Add to Wishlist
Add to Wishlist
S.H Continental Marine
Our team is dedicated to providing exceptional customer service.
Email: info@shcontinentalmarine.com
Choose S.H Continental Marine for your outboard engine needs and enjoy superior quality, exceptional customer service, and unbeatable prices.
Need Help?
+1 (650) 525 4464
Monday – Friday 8:00am-6:00pm (GMT-08:00) Pacific Standard Time (Los Angeles).
Email: info@shcontinentalmarine.com
Address: 948 W Patapsco Ave, Baltimore, MD 21230
S.H Continental Marine
- Free delivery
- Best of all offers
Copyright 2022.KlbTheme . All rights reserved