2019 YAMAHA 30 HP F30LEHA OUTBOARD MOTOR
Specifications
- Engine Type: Yamaha F30LEHA Four Stroke
- Horsepower: 30 hp
- Cylinders: 3 cyl
- Shaft Length: 20″
- Steering: Tiller
- Starter: Electric
- Weight: 223 lbs
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Induction System: EFI
Add to Wishlist
Add to Wishlist
Specifications
- Engine Type: Yamaha F30LA Four Stroke
- Horsepower: 30 hp
- Cylinders: 3 cyl
- Shaft Length: 20″
- Steering: Remote Mech
- Starter: Electric
- Weight: 214 lbs
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Induction System: EFI
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
2019 EVINRUDE 15 HP E15HTSL OUTBOARD MOTOR
Engine
Engine Type: Inline 2-Cylinder E-TEC D.I.
Bore x Stroke: 2.992 x 2.5 in. (76 x 64 mm)
Displacement: 35.2 cu.in. (577cc)
Starting: Electric and Rope
Dimensions
Shaft Length: 20 in. (508 mm)
Weight: 187 lb. (85 kg)
General
Trim Method: High Speed Power Tilt
Propshaft Horsepower: 15 hp
Full Throttle Operating Range: 5000-5500 rpm
Gear Ratio / Shift: 2.15:1
Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
Alternator: 56 Amps Total / 15 Amps Net Dedicated
Steering: Tiller (Remote avail.)
Add to cart
Features
- High Output Series: The Evinrude E-TEC H.O. series are performance engines to the max. Each engine is tuned for extra power and speed. If you like pushing limits in horsepower, speed and torque, then consider our High Output Series.
- Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four–stroke outboard. Extend the life of your outboard and your boating season.
- More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run.
Specifications
- Engine Model: E15HTSL White
- Engine Type: Inline 2-Cylinder E-TEC D.I.
- Bore x Stroke – in (mm): 2.992 x 2.5 (76 x 64)
- Displacement – cu in (cc) L: 35.2 (577)
- Gear Ratio: 2.15:1
- Full Throttle RPM Range: 5000-5500 RPM
- Weight – lbs (kg): 187 (85)
- Starting: Electric and Rope
- Controls: Mechanical
- Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
- Alternator Output*: 56 Amps Total / 15 Amps Net Dedicated
- Steering: Tiller (Remote avail.)
- Trim Method: High Speed Power Tilt
- Trim Range: -6″ to 15″
- Tilt Range: 75°
- Shaft Length – in (mm): 20 (508)
- Lubrication: Multi-Point Targeted Oiling
- Oil Tank Capacity – gal (L): 1.7 (1.6)
- Recommended Oil: Evinrude / Johnson XD-100 Oil
- Recommended Fuel: 87 Octane
- Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
Add to Wishlist
Add to Wishlist
2019 EVINRUDE 15 HP E15HTGL OUTBOARD MOTOR
Engine Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke: 2.992 x 2.5 in. (76 x 64 mm) Displacement: 35.2 cu.in. (577cc) Starting: Electric and Rope Dimensions Shaft Length: 20 in. (508 mm) Weight: 187 lb. (85 kg) General Trim Method: High Speed Power Tilt Propshaft Horsepower: 15 hp Full Throttle Operating Range: 5000-5500 rpm Gear Ratio / Shift: 2.15:1 Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator: 56 Amps Total / 15 Amps Net Dedicated Steering: Tiller (Remote avail.)Features
- High Output Series: The Evinrude E-TEC H.O. series are performance engines to the max. Each engine is tuned for extra power and speed. If you like pushing limits in horsepower, speed and torque, then consider our High Output Series.
- Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four–stroke outboard. Extend the life of your outboard and your boating season.
- More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run.
Specifications
- Engine Model: E15HTGL Graphite
- Engine Type: Inline 2-Cylinder E-TEC D.I.
- Bore x Stroke – in (mm): 2.992 x 2.5 (76 x 64)
- Displacement – cu in (cc) L: 35.2 (577)
- Gear Ratio: 2.15:1
- Full Throttle RPM Range: 5000-5500 RPM
- Weight – lbs (kg): 187 (85)
- Starting: Electric and Rope
- Controls: Mechanical
- Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
- Alternator Output*: 56 Amps Total / 15 Amps Net Dedicated
- Steering: Tiller (Remote avail.)
- Trim Method: High Speed Power Tilt
- Trim Range: -6″ to 15″
- Tilt Range: 75°
- Shaft Length – in (mm): 20 (508)
- Lubrication: Multi-Point Targeted Oiling
- Oil Tank Capacity – gal (L): 1.7 (1.6)
- Recommended Oil: Evinrude / Johnson XD-100 Oil
- Recommended Fuel: 87 Octane
- Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
Add to Wishlist
Add to Wishlist
2019 EVINRUDE 15 HP E15HPSX OUTBOARD MOTOR
Engine Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke: 2.992 x 2.5 in. (76 x 64 mm) Displacement: 35.2 cu.in. (577cc) Starting: Electric and Rope Dimensions Shaft Length: 25 in. (635 mm) Weight: 184 lb. (84 kg) General Trim Method: High Speed Power Tilt Propshaft Horsepower: 15 hp Full Throttle Operating Range: 5000-5500 rpm Gear Ratio / Shift: 2.15:1 Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator: 56 Amps Total / 15 Amps Net Dedicated Steering: Remote (Tiller avail.) Features- High Output Series: The Evinrude E-TEC H.O. series are performance engines to the max. Each engine is tuned for extra power and speed. If you like pushing limits in horsepower, speed and torque, then consider our High Output Series.
- Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four–stroke outboard. Extend the life of your outboard and your boating season.
- More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run.
Specifications
- Engine Model: E15HPSX White
- Engine Type: Inline 2-Cylinder E-TEC D.I.
- Bore x Stroke – in (mm): 2.992 x 2.5 (76 x 64)
- Displacement – cu in (cc) L: 35.2 (577)
- Gear Ratio: 2.15:1
- Full Throttle RPM Range: 5000-5500 RPM
- Weight – lbs (kg): 184 (84)
- Starting: Electric and Rope
- Controls: Mechanical
- Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
- Alternator Output*: 56 Amps Total / 15 Amps Net Dedicated
- Steering: Remote (Tiller avail.)
- Trim Method: High Speed Power Tilt
- Trim Range: -6″ to 15″
- Tilt Range: 75°
- Shaft Length – in (mm): 25 (635)
- Lubrication: Multi-Point Targeted Oiling
- Oil Tank Capacity – gal (L): 1.7 (1.6)
- Recommended Oil: Evinrude / Johnson XD-100 Oil
- Recommended Fuel: 87 Octane
- Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
Add to Wishlist
Add to Wishlist
2019 EVINRUDE 15 HP E15HPSL OUTBOARD MOTOR
Engine Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke: 2.992 x 2.5 in. (76 x 64 mm) Displacement: 35.2 cu.in. (577cc) Starting: Electric and Rope Dimensions Shaft Length: 20 in. (508 mm) Weight: 181 lb. (82 kg) General Trim Method: High Speed Power Tilt Propshaft Horsepower: 15 hp Full Throttle Operating Range: 5000-5500 rpm Gear Ratio / Shift: 2.15:1 Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator: 56 Amps Total / 15 Amps Net Dedicated Steering: Remote (Tiller avail.)Features
- High Output Series: The Evinrude E-TEC H.O. series are performance engines to the max. Each engine is tuned for extra power and speed. If you like pushing limits in horsepower, speed and torque, then consider our High Output Series.
- Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four–stroke outboard. Extend the life of your outboard and your boating season.
- More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run.
Specifications
- Engine Model: E15HPSL White
- Engine Type: Inline 2-Cylinder E-TEC D.I.
- Bore x Stroke – in (mm): 2.992 x 2.5 (76 x 64)
- Displacement – cu in (cc) L: 35.2 (577)
- Gear Ratio: 2.15:1
- Full Throttle RPM Range: 5000-5500 RPM
- Weight – lbs (kg): 181 (82)
- Starting: Electric and Rope
- Controls: Mechanical
- Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
- Alternator Output*: 56 Amps Total / 15 Amps Net Dedicated
- Steering: Remote (Tiller avail.)
- Trim Method: High Speed Power Tilt
- Trim Range: -6″ to 15″
- Tilt Range: 75°
- Shaft Length – in (mm): 20 (508)
- Lubrication: Multi-Point Targeted Oiling
- Oil Tank Capacity – gal (L): 1.7 (1.6)
- Recommended Oil: Evinrude / Johnson XD-100 Oil
- Recommended Fuel: 87 Octane
- Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
2020 MERCURY 6 HP 6MLH OUTBOARD MOTOR
Truly a portable outboard, the 6 HP Mercury weighs only 58 lbs and comes with an integrated gas tank. the Mercury 6 hp Model 6MLH is equipped with the 20 inch long shaft, tiller steering and manual rope start. Standard features of this single cylinder outboard engine include forward, neutral and reverse shift, and access for an external gas tank.- Compact and Lightweight
- Digital CD Ignition with Spark Advance
- High Grade Marine Alloy Construction
- Stainless Steel Water Pump Housing
- Zinc Coated Water Passages
- Rated for Saltwater Use
- Sacrificial Zinc Anodes
- Forward-Neutral-Reverse Gear Shift
- Adjustable Steering Tension Control
- Forward Mounted Gear Shift Selector
- Twist-Grip Throttle with Tension Control
- Integrated Carry Handle
- Thermostat Controlled Water Cooling
- Shallow Water Drive; 6 Trim Positions
- Quiet Through-Propeller-Hub Exhaust
- 1.15 Liter (.30 Gallon) Integral Fuel Tank
- Start-In-Gear Protection
- Low Oil Pressure Warning Indicator
- ESG Over-Rev Protection
- Safety Lanyard Stop Switch
- Owner’s Manual
| MODEL | 6MLH |
|---|---|
| MODEL YEAR | 2020 |
| SKU | 6MLH-20 |
| WEIGHT | 58.0 lb |
| MANUFACTURER | Mercury |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 6hp |
| SHAFT LENGTH | 20″ (Long) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | Internal |
| CYLINDER(S) | 1 |
| DISPLACEMENT | 7.5/123 |
| BORE AND STROKE | 2.32 x 1.77 |
| FULL THROTTLE RPM RANGE | 5000-6000 |
| IGNITION SYSTEM | CDI w/electric spark advance |
| INDUCTION SCAVENGING | OHV |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | 87 Octane (up to 10% ethanol content) |
| FUEL TANK / FUEL LINE | 0.3 US Gallon (1.15 liter) |
| OIL TYPE | Mercury 4-Stroke Outboard Oil |
| OIL CAPACITY | 450 mL / 15 oz |
| LUBRICATION | Wet sump |
| ALTERNATOR | Optional 12V 50W 4A (installation required) |
| COOLING SYSTEM | Water-cooled w/thermostat |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.15:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (forward mounted shift lever) |
| PROPELLER | 7.7″ Diameter X 8.0″ Pitch 3-Blade Aluminum |
Add to Wishlist
Add to Wishlist
2020 MERCURY 6 HP 6MH OUTBOARD MOTOR
The 2020 Mercury 6 HP Outboard Model # 6MH, at just 57 Lbs with an integrated gas tank, is truly a portable outboard. This single cylinder outboard features an easy manual starting with a front mounted gear shift lever as well as tiller steering. The 6MH is a 15 inch short shaft model. Standard feature on this 6 HP Mercury outboard engine is an external tank connection. This portable outboard is perfect for small jon boats, skiffs and as a power source for your sailboat.- Compact and Lightweight
- Digital CD Ignition with Spark Advance
- High Grade Marine Alloy Construction
- Stainless Steel Water Pump Housing
- Zinc Coated Water Passages
- Rated for Saltwater Use
- Sacrificial Zinc Anodes
- Forward-Neutral-Reverse Gear Shift
- Adjustable Steering Tension Control
- Forward Mounted Gear Shift Selector
- Twist-Grip Throttle with Tension Control
- Integrated Carry Handle
- Thermostat Controlled Water Cooling
- Shallow Water Drive; 6 Trim Positions
- Quiet Through-Propeller-Hub Exhaust
- 1.15 Liter (.30 Gallon) Integral Fuel Tank
- Start-In-Gear Protection
- Low Oil Pressure Warning Indicator
- ESG Over-Rev Protection
- Safety Lanyard Stop Switch
- Owner’s Manual
- Mercury Marine 3-Year Warranty
| MODEL | 6MH |
|---|---|
| MODEL YEAR | 2020 |
| SKU | 6MH-20 |
| WEIGHT | 57.0 lb |
| MANUFACTURER | Mercury |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 6hp |
| SHAFT LENGTH | 15″ (Short) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | Internal |
| CYLINDER(S) | 1 |
| DISPLACEMENT | 7.5/123 |
| BORE AND STROKE | 2.32 x 1.77 |
| FULL THROTTLE RPM RANGE | 5000-6000 |
| IGNITION SYSTEM | CDI w/electric spark advance |
| INDUCTION SCAVENGING | OHV |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | CDI w/electric spark advance |
| FUEL TANK / FUEL LINE | 0.3 US Gallon (1.15 liter) |
| OIL TYPE | Mercury 4-Stroke Outboard Oil |
| OIL CAPACITY | 450 mL / 15 oz |
| LUBRICATION | Wet sump |
| ALTERNATOR | Optional 12V 50W 4A (installation required) |
| COOLING SYSTEM | Water-cooled w/thermostat |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.15:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (forward mounted shift lever) |
| PROPELLER | 7.7″ Diameter X 8.0″ Pitch 3-Blade Aluminum |
Add to Wishlist
Add to Wishlist
2024 Yamaha Jet Drive 30HP
Yamaha Jet Drive 30HP – 15, 20, 25, 30, 35, 40″ Shaft
Yamaha’s Jet Drive four strokes, can boldly go where no propped outboard would dare. Shallows. Rocky-bottom rivers. Shoals. White-water rapids. They’d all prove treacherous for a propeller-driven outboard, but a jet drive is all over it. Prop-free, you can “off-road” without worrying about breaking a prop on rocks and other underwater obstructions. So, while you may be giving up the prop, you’re gaining a whole lot of freedom, with powerful, fuel efficient Yamaha Jet Drives available in 150, 115, 90, 60 and 40 horsepower.SPECIFICATIONS
- Engine Type: 3 cyl
- Displacement: 747cc
- Shaft Length : 15″, 20″ 25″ and “30
- Bore x Stroke: 65 x 75 mm (2.56 x 2.95 in)
- Prop Shaft Horsepower: 30hp @ 5500rpm
- Full Throttle RPM Range: 5000 ~ 6000 rpm
- Alternator Output at W.O.T.: 16 Amp
- Compression Ratio: 9.4:1
- Fuel Induction System: EFI
- Weight *: 99 kg (219lbs) – 103 kg (227 lbs)
- Recommended Fuel: Octane 87
- Recommended Engine Oil: Yamalube® 4M (See owner’s manual)
- Recommended Fuel Filtration: Yamaha 10-Micron Fuel/Water Separating Filter (external)
- C.A.R.B. Rating: 2-Star
- Exhaust: Through Jet Nozzle
- Intake: 6
- Ignition: CDI Microcomputer
- Spark Plug: DPR6EB-9
- Starting System: Electric
- Lubrication: Wet Sump
- Engine Oil Capacity: 1.7L/1.5L
- Recommended Cooling: Thermostatic Control
- Ethanol Blend Limit: 10% Maximum
- Gear Ratio: Direct Drive
- Gear Shift: Forward, Neutral, Reverse
- Shaft Length: Fits 20″ Transom
- Degree of Tilt: 65°
- Degree of Trim: -4° through +16°
- Mounting Centers: N/A
- Steering:
- Steering Angle (maximum): 40° from center, either direction
Add to Wishlist
Add to Wishlist
2024 Yamaha 30hp Outboard | F30LA | Jet Drive
Add to cart
The Yamaha 30hp Midrange four strokes are known for their small size and solid performance. Light and powerful, these nimble, three-cylinder wonders are perfect for light duty on skiffs, jons and inflatables and small pontoons or aluminum fishing boats. With single-overhead camshafts and electronic fuel injection, they deliver quick starts, responsive power, quiet operation and valuable efficiency. These 747cc 30hp midrange outboards boasts a streamlined design and solid performance. At just 214 pounds, it’s suitable for lightweight craft such as aluminum fishing boats and inflatables.
KEY FEATURES
Control and Comfort: Yamaha’s optional, award-winning Multi-Function Tiller handle features a Variable Trolling RPM Switch (VTS). It allows for precision trolling speed adjustments in 50-RPM increments. Compatible with all Midrange models. Easy Engine Flushing: A Freshwater Flush Device allows you to flush the engine without running it, for added convenience and extended engine life. Power Trim and Tilt: Power trim and tilt models provide a trim range of -3 up to +20 degrees. This brings the bow of the boat up, for better hole shot and top speed and a smoother ride. Reliability and Durability: Combined with Yamaha’s proprietary alloy (YDC-30), their exclusive Phaze Five™ anti-coorosive pain system provides a tough, five-layer barrier against corrosion. This protection is standard on all Yamaha Midrange four-stroke engines.MOTOR SPECIFICATIONS
-
- Engine Type: Yamaha F30LA Four Stroke
- Horsepower: 30hp
- Cylinders: 3 cyl
- Shaft Length: 20″ Long
- Steering: Remote Mechanical
- Starter: Electric
- Weight: 214 lbs
- Alternator Output: 17 amp
- Degree of Tilt: 65°- 66°
- Degree of Trim: -3° through +20°
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
STANDARD FEATURES
-
- Power Trim & Tilt
- Steering Link Arm
- Fuel Line
- Owner’s Manual
Add to Wishlist
Add to Wishlist
S.H Continental Marine
Our team is dedicated to providing exceptional customer service.
Email: info@shcontinentalmarine.com
Choose S.H Continental Marine for your outboard engine needs and enjoy superior quality, exceptional customer service, and unbeatable prices.
Need Help?
+1 (650) 525 4464
Monday – Friday 8:00am-6:00pm (GMT-08:00) Pacific Standard Time (Los Angeles).
Email: info@shcontinentalmarine.com
Address: 948 W Patapsco Ave, Baltimore, MD 21230
S.H Continental Marine
- Free delivery
- Best of all offers
Copyright 2025.KlbTheme . All rights reserved