2020 YAMAHA 6 HP F6SMHA OUTBOARD MOTOR
Model Name F6SMHA Trim Name Base Generic Type (Primary) Portable Engine Type 1 cyl Engine Power 6 hp at 5000 rpm Starter System: Manual Displacement 139 cc Bore 2.44 in (62 mm) Stroke 1.81 in (46 mm) Compression Ratio 8.9:1 Throttle Full RPM Range: 4500 ~ 5500 Steering Angle (maximum): 90° from center, either direction Exhaust Above Propeller Ignition CDI Oil Type Recommended: Yamalube® 4M Lubrication Wet Sump Cooling Recommended: Thermostatic Control Gear Ratio (Primary) 2.08:1 Gear Shifter Forward, Neutral, Reverse Spark Plug CR6HSB Alternator Output, Maximum 6 Amp | at W.O.T.: 6 Amp Fuel System Induction: Carb | Ethanol Blend Limit: 10% Maximum Fuel Type Recommended: Octane 87 Dimensions Degree of Tilt: 69° | Degree of Trim: -4° through +16° Length Shaft: 15″ – 20″ Oil capacity 0.6 L Dry Weight 15″ shaft: 59 lbs (27 kg) | 20″ shaft: 61 lbs (28 kg) Features Intake: 2 | C.A.R.B. Rating: 3-Star
Add to Wishlist
Add to Wishlist
2020 YAMAHA 6 HP F6LMHA OUTBOARD MOTOR
- Engine Type: One-Cylinder
- Displacement: 139cc/8.5ci
- Bore x Stroke: 62 x 46mm/2.44 x 1.81in
- Full Throttle RPM Range: 4500-5500
- Horsepower Rating at Prop Shaft: 6hp at 5000rpm
- Compression Ratio: 8.9:1
- Fuel Induction: OHV(Overhead Valve)
- Starting Method: Manual
- Ignition: CDI
- Lubrication: Wet Sump
- Degree of Trim: 5 positions
- Degree of Tilt: 69°
- Exhaust: Above propeller
- Cooling: Water/Thermostatic Control
- Drive: Forward, Neutral, Reverse
- Gear Ratio: 27:13/2.08:1
- Shaft Length:Short=15″, Long=20″
- Recommended Fuel: Regular Unleaded/Minimum Pump Octane 87
- Recommended Oil: Yamalube® 4M
- Engine Oil Capacity: .6L/.63qts
- Spark Plug: CR6HSB
- Prop Nut: 17mm
- Fuel Hose Diameter: 8mm
- Weight: 28kg/61lbs
- Electric Start Kit: Optional on F6 only
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
2019 EVINRUDE 15 HP E15HTSL OUTBOARD MOTOR
Engine
Engine Type: Inline 2-Cylinder E-TEC D.I.
Bore x Stroke: 2.992 x 2.5 in. (76 x 64 mm)
Displacement: 35.2 cu.in. (577cc)
Starting: Electric and Rope
Dimensions
Shaft Length: 20 in. (508 mm)
Weight: 187 lb. (85 kg)
General
Trim Method: High Speed Power Tilt
Propshaft Horsepower: 15 hp
Full Throttle Operating Range: 5000-5500 rpm
Gear Ratio / Shift: 2.15:1
Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
Alternator: 56 Amps Total / 15 Amps Net Dedicated
Steering: Tiller (Remote avail.)
Add to cart
Features
- High Output Series: The Evinrude E-TEC H.O. series are performance engines to the max. Each engine is tuned for extra power and speed. If you like pushing limits in horsepower, speed and torque, then consider our High Output Series.
- Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four–stroke outboard. Extend the life of your outboard and your boating season.
- More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run.
Specifications
- Engine Model: E15HTSL White
- Engine Type: Inline 2-Cylinder E-TEC D.I.
- Bore x Stroke – in (mm): 2.992 x 2.5 (76 x 64)
- Displacement – cu in (cc) L: 35.2 (577)
- Gear Ratio: 2.15:1
- Full Throttle RPM Range: 5000-5500 RPM
- Weight – lbs (kg): 187 (85)
- Starting: Electric and Rope
- Controls: Mechanical
- Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
- Alternator Output*: 56 Amps Total / 15 Amps Net Dedicated
- Steering: Tiller (Remote avail.)
- Trim Method: High Speed Power Tilt
- Trim Range: -6″ to 15″
- Tilt Range: 75°
- Shaft Length – in (mm): 20 (508)
- Lubrication: Multi-Point Targeted Oiling
- Oil Tank Capacity – gal (L): 1.7 (1.6)
- Recommended Oil: Evinrude / Johnson XD-100 Oil
- Recommended Fuel: 87 Octane
- Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
Add to Wishlist
Add to Wishlist
2019 EVINRUDE 15 HP E15HTGL OUTBOARD MOTOR
Engine Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke: 2.992 x 2.5 in. (76 x 64 mm) Displacement: 35.2 cu.in. (577cc) Starting: Electric and Rope Dimensions Shaft Length: 20 in. (508 mm) Weight: 187 lb. (85 kg) General Trim Method: High Speed Power Tilt Propshaft Horsepower: 15 hp Full Throttle Operating Range: 5000-5500 rpm Gear Ratio / Shift: 2.15:1 Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator: 56 Amps Total / 15 Amps Net Dedicated Steering: Tiller (Remote avail.)Features
- High Output Series: The Evinrude E-TEC H.O. series are performance engines to the max. Each engine is tuned for extra power and speed. If you like pushing limits in horsepower, speed and torque, then consider our High Output Series.
- Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four–stroke outboard. Extend the life of your outboard and your boating season.
- More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run.
Specifications
- Engine Model: E15HTGL Graphite
- Engine Type: Inline 2-Cylinder E-TEC D.I.
- Bore x Stroke – in (mm): 2.992 x 2.5 (76 x 64)
- Displacement – cu in (cc) L: 35.2 (577)
- Gear Ratio: 2.15:1
- Full Throttle RPM Range: 5000-5500 RPM
- Weight – lbs (kg): 187 (85)
- Starting: Electric and Rope
- Controls: Mechanical
- Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
- Alternator Output*: 56 Amps Total / 15 Amps Net Dedicated
- Steering: Tiller (Remote avail.)
- Trim Method: High Speed Power Tilt
- Trim Range: -6″ to 15″
- Tilt Range: 75°
- Shaft Length – in (mm): 20 (508)
- Lubrication: Multi-Point Targeted Oiling
- Oil Tank Capacity – gal (L): 1.7 (1.6)
- Recommended Oil: Evinrude / Johnson XD-100 Oil
- Recommended Fuel: 87 Octane
- Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
Add to Wishlist
Add to Wishlist
2019 EVINRUDE 15 HP E15HPSX OUTBOARD MOTOR
Engine Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke: 2.992 x 2.5 in. (76 x 64 mm) Displacement: 35.2 cu.in. (577cc) Starting: Electric and Rope Dimensions Shaft Length: 25 in. (635 mm) Weight: 184 lb. (84 kg) General Trim Method: High Speed Power Tilt Propshaft Horsepower: 15 hp Full Throttle Operating Range: 5000-5500 rpm Gear Ratio / Shift: 2.15:1 Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator: 56 Amps Total / 15 Amps Net Dedicated Steering: Remote (Tiller avail.) Features- High Output Series: The Evinrude E-TEC H.O. series are performance engines to the max. Each engine is tuned for extra power and speed. If you like pushing limits in horsepower, speed and torque, then consider our High Output Series.
- Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four–stroke outboard. Extend the life of your outboard and your boating season.
- More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run.
Specifications
- Engine Model: E15HPSX White
- Engine Type: Inline 2-Cylinder E-TEC D.I.
- Bore x Stroke – in (mm): 2.992 x 2.5 (76 x 64)
- Displacement – cu in (cc) L: 35.2 (577)
- Gear Ratio: 2.15:1
- Full Throttle RPM Range: 5000-5500 RPM
- Weight – lbs (kg): 184 (84)
- Starting: Electric and Rope
- Controls: Mechanical
- Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
- Alternator Output*: 56 Amps Total / 15 Amps Net Dedicated
- Steering: Remote (Tiller avail.)
- Trim Method: High Speed Power Tilt
- Trim Range: -6″ to 15″
- Tilt Range: 75°
- Shaft Length – in (mm): 25 (635)
- Lubrication: Multi-Point Targeted Oiling
- Oil Tank Capacity – gal (L): 1.7 (1.6)
- Recommended Oil: Evinrude / Johnson XD-100 Oil
- Recommended Fuel: 87 Octane
- Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
Add to Wishlist
Add to Wishlist
S.H Continental Marine
Our team is dedicated to providing exceptional customer service.
Email: info@shcontinentalmarine.com
Choose S.H Continental Marine for your outboard engine needs and enjoy superior quality, exceptional customer service, and unbeatable prices.
Need Help?
+1 (650) 525 4464
Monday – Friday 8:00am-6:00pm (GMT-08:00) Pacific Standard Time (Los Angeles).
Email: info@shcontinentalmarine.com
Address: 948 W Patapsco Ave, Baltimore, MD 21230
S.H Continental Marine
- Free delivery
- Best of all offers
Copyright 2022.KlbTheme . All rights reserved