2019 YAMAHA 30 HP F30LEHA OUTBOARD MOTOR
Specifications
- Engine Type: Yamaha F30LEHA Four Stroke
- Horsepower: 30 hp
- Cylinders: 3 cyl
- Shaft Length: 20″
- Steering: Tiller
- Starter: Electric
- Weight: 223 lbs
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Induction System: EFI
Add to Wishlist
Add to Wishlist
Specifications
- Engine Type: Yamaha F30LA Four Stroke
- Horsepower: 30 hp
- Cylinders: 3 cyl
- Shaft Length: 20″
- Steering: Remote Mech
- Starter: Electric
- Weight: 214 lbs
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Induction System: EFI
Add to Wishlist
Add to Wishlist
2020 YAMAHA 2.5 HP F2.5SMHB OUTBOARD MOTOR
Power/Performance- Streamlined Intake Manifold
- Long Span Mounting System
- Four Stroke Engine Design
- California C.A.R.B. Ultra Low Emissions 3 Star Rating
- Meets all current Federal EPA Emission Standards
- Overhead Valve (OHV) Design
- 2-Valves Per Cylinder
- Precise Carburetor Setting
- Short Stroke Engine Design
- Rubber Dampened Tiller Handle
- Compact Offset Crankshaft
- Phaze Five™ Paint System
- Stainless Steel Driveshaft, Prop Shaft, Shift Shaft and Steering Tube
- Sacrificial Anodes
- Splined Prop Shaft
- TCI Ignition
- Splash Lubrication
- YDC Aluminum Alloy
- Cast Iron Camshaft
- Water Resistant Fuel Tank Cap
- Dual Transom Clamps
- Multiple Gripping Points
- Decompression Device
- Built-In Fuel Tank
- 360° Swivel Steering
- F/N Shift
- Tilt Up Engine Stopping Device
- Pilot Water Blocking Device
- Split Bottom Cowling
Add to Wishlist
Add to Wishlist
2020 YAMAHA 2.5 HP F2.5LMHB OUTBOARD MOTOR2.5
NEW YAMAHA 2.5 LMHB FOUR STROKE MOTOR Engine Type One Cylinder Displacement 4.4 ci (72 cc) Bore x Stroke 54 x 31.5mm (2.13 x 1.24 in) Prop Shaft Horsepower 2.5 hp @ 5500 rpm Compression Ratio 8.8:1 Fuel Induction Overhead Valve Exhaust Above Propeller Intake Carburetor Ignition TCI Spark Plug CR6HSB-000-000 Alternator Output N.A. Starting System Manual Engine Oil Capacity 0.35L(0.37qt) Full Throttle RPM Range 5250 ~ 5750 rpm Cooling Water/Thermostatic Control Recommended Engine Oil Yamalube® 4M (See Owner’s Manual) Recommended Fuel Regular Unleaded (Minimum Pump Octane 87) Recommended Fuel Filtration Yamaha Mini 10-Micron Fuel/Water Separating Filter (external) Gear Ratio 2.01:1 Gear Shift Forward, Neutral Shaft Length S=15″, L=20″ Degree of Tilt 79° Degree of Trim 4 positions C.A.R.B. Rating 3-Star Dry Weight F2.5SMHB = 17kg (37 lbs), F2.5LMHB = 18kg (40 lbs) Steering Angle (maximum) 360° from center, either direction
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
2024 Yamaha Jet Drive 30HP
Yamaha Jet Drive 30HP – 15, 20, 25, 30, 35, 40″ Shaft
Yamaha’s Jet Drive four strokes, can boldly go where no propped outboard would dare. Shallows. Rocky-bottom rivers. Shoals. White-water rapids. They’d all prove treacherous for a propeller-driven outboard, but a jet drive is all over it. Prop-free, you can “off-road” without worrying about breaking a prop on rocks and other underwater obstructions. So, while you may be giving up the prop, you’re gaining a whole lot of freedom, with powerful, fuel efficient Yamaha Jet Drives available in 150, 115, 90, 60 and 40 horsepower.SPECIFICATIONS
- Engine Type: 3 cyl
- Displacement: 747cc
- Shaft Length : 15″, 20″ 25″ and “30
- Bore x Stroke: 65 x 75 mm (2.56 x 2.95 in)
- Prop Shaft Horsepower: 30hp @ 5500rpm
- Full Throttle RPM Range: 5000 ~ 6000 rpm
- Alternator Output at W.O.T.: 16 Amp
- Compression Ratio: 9.4:1
- Fuel Induction System: EFI
- Weight *: 99 kg (219lbs) – 103 kg (227 lbs)
- Recommended Fuel: Octane 87
- Recommended Engine Oil: Yamalube® 4M (See owner’s manual)
- Recommended Fuel Filtration: Yamaha 10-Micron Fuel/Water Separating Filter (external)
- C.A.R.B. Rating: 2-Star
- Exhaust: Through Jet Nozzle
- Intake: 6
- Ignition: CDI Microcomputer
- Spark Plug: DPR6EB-9
- Starting System: Electric
- Lubrication: Wet Sump
- Engine Oil Capacity: 1.7L/1.5L
- Recommended Cooling: Thermostatic Control
- Ethanol Blend Limit: 10% Maximum
- Gear Ratio: Direct Drive
- Gear Shift: Forward, Neutral, Reverse
- Shaft Length: Fits 20″ Transom
- Degree of Tilt: 65°
- Degree of Trim: -4° through +16°
- Mounting Centers: N/A
- Steering:
- Steering Angle (maximum): 40° from center, either direction
Add to Wishlist
Add to Wishlist
2024 Yamaha 30hp Outboard | F30LA | Jet Drive
Add to cart
The Yamaha 30hp Midrange four strokes are known for their small size and solid performance. Light and powerful, these nimble, three-cylinder wonders are perfect for light duty on skiffs, jons and inflatables and small pontoons or aluminum fishing boats. With single-overhead camshafts and electronic fuel injection, they deliver quick starts, responsive power, quiet operation and valuable efficiency. These 747cc 30hp midrange outboards boasts a streamlined design and solid performance. At just 214 pounds, it’s suitable for lightweight craft such as aluminum fishing boats and inflatables.
KEY FEATURES
Control and Comfort: Yamaha’s optional, award-winning Multi-Function Tiller handle features a Variable Trolling RPM Switch (VTS). It allows for precision trolling speed adjustments in 50-RPM increments. Compatible with all Midrange models. Easy Engine Flushing: A Freshwater Flush Device allows you to flush the engine without running it, for added convenience and extended engine life. Power Trim and Tilt: Power trim and tilt models provide a trim range of -3 up to +20 degrees. This brings the bow of the boat up, for better hole shot and top speed and a smoother ride. Reliability and Durability: Combined with Yamaha’s proprietary alloy (YDC-30), their exclusive Phaze Five™ anti-coorosive pain system provides a tough, five-layer barrier against corrosion. This protection is standard on all Yamaha Midrange four-stroke engines.MOTOR SPECIFICATIONS
-
- Engine Type: Yamaha F30LA Four Stroke
- Horsepower: 30hp
- Cylinders: 3 cyl
- Shaft Length: 20″ Long
- Steering: Remote Mechanical
- Starter: Electric
- Weight: 214 lbs
- Alternator Output: 17 amp
- Degree of Tilt: 65°- 66°
- Degree of Trim: -3° through +20°
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
STANDARD FEATURES
-
- Power Trim & Tilt
- Steering Link Arm
- Fuel Line
- Owner’s Manual
Add to Wishlist
Add to Wishlist
2023 Yamaha Jet Drive 30HP
Yamaha Jet Drive 30HP – 15, 20, 25, 30, 35″ Shaft
Yamaha Jet Drive 30HP – 15, 20, 25, 30, 35″ Shaft, four stroke produces 30 hp at the pump. Its compact, light-weight SOHC three-cylinder, in-line design features a long-track induction system and a single throttle valve. This creates compact, light-weight power and improves throttle response.
- Compatible with mechanical controls, our Multi-Function Tiller Handle, analog gauges and Command Link®
- 219 pounds (including jet pump assembly)
- Fits 20-inch transom boats
- Solid 16-amp alternator
- Nitro Assist Tilt
Basic Info
Model:F40 Jet
Year:2019,20,21,22,23,24
Condition:New
Category:Jet
Technical Details
Power:30 HP
RPM:5500
Fuel:Gasoline
Number Cylinders:3
Descriptions
Fuel Induction System:EFI
Starting System:Electric
Ignition System:CDI Microcomputer
Lubrication System:Wet Sump
Measurements
Bore:2.56 in
Weight:219 lb
Weight Type:Dry
Stroke:2.95 in
Alternator Output:16 Volts
Shaft Length : 15″, 20″ 25″ and “30
Add to Wishlist
Add to Wishlist
2023 Yamaha 30hp High Thrust Outboard | T25LWTC
The Yamaha 30hp Midrange four strokes are known for their small size and solid performance. Light and powerful, these nimble, three-cylinder wonders are perfect for light duty on skiffs, jons and inflatables and small pontoons or aluminum fishing boats. With single-overhead camshafts and electronic fuel injection, they deliver quick starts, responsive power, quiet operation and valuable efficiency. These 747cc 30hp midrange outboards boasts a streamlined design and solid performance. At just 214 pounds, it’s suitable for lightweight craft such as aluminum fishing boats and inflatables.
KEY FEATURES
Control and Comfort: Yamaha’s optional, award-winning Multi-Function Tiller handle features a Variable Trolling RPM Switch (VTS). It allows for precision trolling speed adjustments in 50-RPM increments. Compatible with all Midrange models. Easy Engine Flushing: A Freshwater Flush Device allows you to flush the engine without running it, for added convenience and extended engine life. Reliability and Durability: Combined with Yamaha’s proprietary alloy (YDC-30), their exclusive Phaze Five™ anti-coorosive pain system provides a tough, five-layer barrier against corrosion. This protection is standard on all Yamaha Midrange four-stroke engines.MOTOR SPECIFICATIONS
-
- Engine Type: Yamaha F30LEHA Four Stroke
- Horsepower: 30hp
- Cylinders: 3 cyl
- Shaft Length: 20″ Long
- Steering: Tiller
- Starter: Electric
- Weight: 223 lbs
- Alternator Output: 17 amp
- Degree of Tilt: 65°- 66°
- Degree of Trim: -3° through +20°
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 747cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
STANDARD FEATURES
-
- Nitro-Assist Tilt
- Fuel Line
- Safety Lanyard
- Owner’s Manual
Add to Wishlist
Add to Wishlist
2020 Mercury 200XL Pro XS DTS
Engine
Engine Type: V-8
Bore x Stroke: 3.6 in. x 3.4 in. (92 mm x 86 mm)
Displacement: 4.6 L
Starting: Electric Start with SmartStart Protection
Dimensions
Shaft Length: 25 in. (635 mm)
Weight: 505 lb. (229 kg)
General
Trim Method: Power trim and tilt
Propshaft Horsepower: 200 hp (149 kW)
Full Throttle Operating Range: 5600-6200 rpm
Gear Ratio / Shift: 1.75:1 / F-N-R
Fuel Induction: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
Alternator: 85 Amp / 1071 Watt with Idle Charge
Cooling: Water-cooled with thermostat
Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
Features
- Engine Details: Maximized power, torque and overall performance for spectacular acceleration and top speed. Great for bass and multi-species fishing boats.
- Take it to the Limit: No outboard gets from zero to wide-open quicker than a Mercury Pro XS, now with V8 4.6-liter and V6 3.4-liter muscle. This is performance that will rocket your rig out of the hole and to the next hot spot in a blur. These Pro XS models feature generous displacement in a performance-tuned powerhead with a deep-breathing double-overhead-cam design and long-runner intake tract that delivers instant throttle response at any speed.
- Discover better boating: Active Trim by Mercury makes boating easier and more enjoyable by automatically trimming your engine. Active Trim simplifies boat operation while improving engine performance and decreasing fuel costs.
Specifications
- HP / kW: 200 / 149
- Engine type: V-8
- MidSection: Conventional MidSection
- Displacement (CID/CC): 279 CID
- Displacement (L): 4.6L
- Cylinder Configuration: V-8 [64 degree] with Dual Overhead Cam [DOHC] and 32-valves
- Full throttle RPM: 5600-6200
- Air induction: Performance-Tuned Long-Runner Intake Manifold
- Fuel induction system: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
- Alternator amp / Watt: 85-amp (1071 Watt) with Idle Charge
- Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum
- Recommended oil: NMMA Certified FCW SAE 10W-30
- Engine protection operator warning system: SmartCraft Engine Guardian
- Compatible with SmartCraft digital technology: Yes
- Starting: Electric Start with SmartStart Protection
- Controls: Remote Mechanical or Digital Throttle & Shift (DTS)
- Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
- Shaft length: 25″ / 635 mm
- Gearcase ratio: 1.75:1
- Dry weight: 505 lbs / 229 kgs
- CARB star rating: 3
- Bore and stroke: 3.6 in x 3.4 in / 92 mm x 86 mm
- Ignition: SmartCraft PCM 112 Digital Inductive
- Cooling system: Water-cooled with thermostat
- Gear shift: F-N-R
- Gearcase options: 5.44″
- Trim system: Power trim and tilt
- Exhaust system: Through prop
- Color: Phantom Black
- Lubrication system: Wet sump
- Oil Capacity: 7.0 Quarts / 6.6 Liters
- Maximum Trim Range: 20° (-6° to 14°)
- Maximum Tilt Range: 73° (-6° to 67°)
Add to Wishlist
Add to Wishlist
2020 Mercury 200XL Pro XS
Engine
Engine Type: V-8
Bore x Stroke: 3.6 in. x 3.4 in. (92 mm x 86 mm)
Displacement: 4.6 L
Starting: Electric Start with SmartStart Protection
Dimensions
Shaft Length: 25 in. (635 mm)
Weight: 505 lb. (229 kg)
General
Trim Method: Power trim and tilt
Propshaft Horsepower: 200 hp (149 kW)
Full Throttle Operating Range: 5600-6200 rpm
Gear Ratio / Shift: 1.75:1 / F-N-R
Fuel Induction: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
Alternator: 85 Amp / 1071 Watt with Idle Charge
Cooling: Water-cooled with thermostat
Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
Features
- Engine Details: Maximized power, torque and overall performance for spectacular acceleration and top speed. Great for bass and multi-species fishing boats.
- Take it to the Limit: No outboard gets from zero to wide-open quicker than a Mercury Pro XS, now with V8 4.6-liter and V6 3.4-liter muscle. This is performance that will rocket your rig out of the hole and to the next hot spot in a blur. These Pro XS models feature generous displacement in a performance-tuned powerhead with a deep-breathing double-overhead-cam design and long-runner intake tract that delivers instant throttle response at any speed.
- Discover better boating: Active Trim by Mercury makes boating easier and more enjoyable by automatically trimming your engine. Active Trim simplifies boat operation while improving engine performance and decreasing fuel costs.
Specifications
- HP / kW: 200 / 149
- Engine type: V-8
- MidSection: Conventional MidSection
- Displacement (CID/CC): 279 CID
- Displacement (L): 4.6L
- Cylinder Configuration: V-8 [64 degree] with Dual Overhead Cam [DOHC] and 32-valves
- Full throttle RPM: 5600-6200
- Air induction: Performance-Tuned Long-Runner Intake Manifold
- Fuel induction system: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
- Alternator amp / Watt: 85-amp (1071 Watt) with Idle Charge
- Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum
- Recommended oil: NMMA Certified FCW SAE 10W-30
- Engine protection operator warning system: SmartCraft Engine Guardian
- Compatible with SmartCraft digital technology: Yes
- Starting: Electric Start with SmartStart Protection
- Controls: Remote Mechanical or Digital Throttle & Shift (DTS)
- Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
- Shaft length: 25″ / 635 mm
- Gearcase ratio: 1.75:1
- Dry weight: 505 lbs / 229 kgs
- CARB star rating: 3
- Bore and stroke: 3.6 in x 3.4 in / 92 mm x 86 mm
- Ignition: SmartCraft PCM 112 Digital Inductive
- Cooling system: Water-cooled with thermostat
- Gear shift: F-N-R
- Gearcase options: 5.44″
- Trim system: Power trim and tilt
- Exhaust system: Through prop
- Color: Phantom Black
- Lubrication system: Wet sump
- Oil Capacity: 7.0 Quarts / 6.6 Liters
- Maximum Trim Range: 20° (-6° to 14°)
- Maximum Tilt Range: 73° (-6° to 67°)
Add to Wishlist
Add to Wishlist
S.H Continental Marine
Our team is dedicated to providing exceptional customer service.
Email: info@shcontinentalmarine.com
Choose S.H Continental Marine for your outboard engine needs and enjoy superior quality, exceptional customer service, and unbeatable prices.
Need Help?
+1 (650) 525 4464
Monday – Friday 8:00am-6:00pm (GMT-08:00) Pacific Standard Time (Los Angeles).
Email: info@shcontinentalmarine.com
Address: 948 W Patapsco Ave, Baltimore, MD 21230
S.H Continental Marine
- Free delivery
- Best of all offers
Copyright 2022.KlbTheme . All rights reserved