0
0 items
$0.00
No products in the cart.
2020 YAMAHA 2.5 HP F2.5SMHB OUTBOARD MOTOR
Power/Performance- Streamlined Intake Manifold
- Long Span Mounting System
- Four Stroke Engine Design
- California C.A.R.B. Ultra Low Emissions 3 Star Rating
- Meets all current Federal EPA Emission Standards
- Overhead Valve (OHV) Design
- 2-Valves Per Cylinder
- Precise Carburetor Setting
- Short Stroke Engine Design
- Rubber Dampened Tiller Handle
- Compact Offset Crankshaft
- Phaze Five™ Paint System
- Stainless Steel Driveshaft, Prop Shaft, Shift Shaft and Steering Tube
- Sacrificial Anodes
- Splined Prop Shaft
- TCI Ignition
- Splash Lubrication
- YDC Aluminum Alloy
- Cast Iron Camshaft
- Water Resistant Fuel Tank Cap
- Dual Transom Clamps
- Multiple Gripping Points
- Decompression Device
- Built-In Fuel Tank
- 360° Swivel Steering
- F/N Shift
- Tilt Up Engine Stopping Device
- Pilot Water Blocking Device
- Split Bottom Cowling
Add to Wishlist
Add to Wishlist
2020 YAMAHA 2.5 HP F2.5LMHB OUTBOARD MOTOR2.5
NEW YAMAHA 2.5 LMHB FOUR STROKE MOTOR Engine Type One Cylinder Displacement 4.4 ci (72 cc) Bore x Stroke 54 x 31.5mm (2.13 x 1.24 in) Prop Shaft Horsepower 2.5 hp @ 5500 rpm Compression Ratio 8.8:1 Fuel Induction Overhead Valve Exhaust Above Propeller Intake Carburetor Ignition TCI Spark Plug CR6HSB-000-000 Alternator Output N.A. Starting System Manual Engine Oil Capacity 0.35L(0.37qt) Full Throttle RPM Range 5250 ~ 5750 rpm Cooling Water/Thermostatic Control Recommended Engine Oil Yamalube® 4M (See Owner’s Manual) Recommended Fuel Regular Unleaded (Minimum Pump Octane 87) Recommended Fuel Filtration Yamaha Mini 10-Micron Fuel/Water Separating Filter (external) Gear Ratio 2.01:1 Gear Shift Forward, Neutral Shaft Length S=15″, L=20″ Degree of Tilt 79° Degree of Trim 4 positions C.A.R.B. Rating 3-Star Dry Weight F2.5SMHB = 17kg (37 lbs), F2.5LMHB = 18kg (40 lbs) Steering Angle (maximum) 360° from center, either direction
Add to Wishlist
Add to Wishlist
2023 Tohatsu 9.9 HP MFS9.9ES Outboard Motor
Tohatsu 9.9 HP EFI outboard, model MFS9.9ES. This Tohatsu outboard delivers the big power you want, but does so in an affordable, compact portable package. This outboard comes equipped with a 15 inch shaft, with a manual rope pull start. Perfect for jon boats, inflatables and skinny water, standard features include forward, neutral and reverse shift lever on the front of the engine, tiller steering and comes with an separate 3 gallon fuel tank Tohatsu 9.9 HP MFS9.9ES Outboard Motor
Add to Wishlist
Add to Wishlist
2023 Tohatsu 9.9 HP MFS9.9EL Outboard Motor
Tohatsu 9.9 HP EFI outboard, model MFS9.9EL. This Tohatsu outboard delivers the big power you want, but does so in an affordable, compact portable package. This outboard comes equipped with a 20 inch shaft, with a manual rope pull start. Perfect as a kicker motor for assist and backup of V-hull boats. Standard features include forward, neutral and reverse shift lever on the front of the engine, tiller steering and comes with an separate 3 gallon fuel tank. Tohatsu 9.9 HP MFS9.9EL Outboard Motor
Add to Wishlist
Add to Wishlist
2023 Tohatsu 9.9 HP MFS9.9EEFUL Outboard Motor
Tohatsu 9.9 HP EFI outboard, model MFS9.9EEFUL. This Tohatsu outboard delivers the big power you want, but does so in an affordable, compact portable package. This outboard comes equipped with a 25 inch shaft and electric start with the manual pull rope backup, as well as a 4 blade high thrust prop. Perfect as a kicker motor to assist and backup of V-hull boats. Standard features include forward, neutral and reverse shift lever on the front of the engine, tiller steering and comes with an separate 3 gallon fuel tank. Tohatsu 9.9 HP MFS9.9EEFUL
Add to Wishlist
Add to Wishlist
2023 Tohatsu 9.9 HP MFS9.9EEFTUL Outboard Motor
Tohatsu 9.9 HP EFI outboard, model MFS9.9EEFTUL. This Tohatsu outboard delivers the big power you want, but does so in an affordable, compact portable package. This outboard comes equipped with a 25 inch shaft, electric start with a manual pull rope and power tilt. The MFS9.9EEFTUL is also perfect as a kicker motor to assist and backup for semi and deep V hulls, as well as sail boats and catamarans. Standard features include forward, neutral and reverse shift lever on the front of the engine, tiller steering and comes with an separate 3 gallon fuel tank.
Add to Wishlist
Add to Wishlist
2023 Tohatsu 9.9 HP MFS9.9EEFTL Outboard Motor
Tohatsu 9.9 HP EFI outboard, model MFS9.9EEFTL. This Tohatsu outboard delivers the big power you want, but does so in an affordable, compact portable package. This outboard comes equipped with a 20 inch long shaft, electric start with a manual pull rope, and power tilt. Perfect for a kicker motor on a sail boat, trolling, or back up power on a larger boat, standard features include forward, neutral and reverse shift lever on the front of the engine, tiller steering and comes with an separate 3 gallon fuel tank. Tohatsu 9.9 HP MFS9.9EEFTL outboard motor
Add to Wishlist
Add to Wishlist
2023 Tohatsu 9.9 HP MFS9.9EEFL Outboard Motor
Tohatsu 9.9 HP EFI outboard, model MFS9.9EEFL. This Tohatsu outboard delivers the big power you want, but does so in an affordable, compact portable package. This outboard comes equipped with a 20 inch long shaft and electric start with the manual pull rope backup. Perfect for a kicker motor on a sail boat, trolling, or back up power on a larger boat, standard features include forward, neutral and reverse shift lever on the front of the engine, tiller steering and comes with an external 3 gallon fuel tank. Tohatsu 9.9 HP MFS9.9EEFL outboard motor
Add to Wishlist
Add to Wishlist
2022 Tohatsu 9.9 HP MFS9.9EEFS Outboard Motor for sale
In Stock
2022 Tohatsu 9.9 HP MFS9.9EEFS Outboard Motor
Tohatsu 9.9 HP EFI outboard, model MFS9.9EEFS. This Tohatsu outboard delivers the big power you want, but does so in an affordable, compact portable package. This outboard comes equipped with a 15 inch shaft, with electric start and the manual pull rope for backup. The MFS9.9EEFS model is ideal for jon boats, inflatables and skinny water. Standard features include forward, neutral and reverse shift lever on the front of the engine, tiller steering and comes with an separate 3 gallon fuel tank, Tohatsu 9.9 HP MFS9.9EEFS Outboard Motor
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
2020 Mercury 200XL Pro XS DTS
Engine
Engine Type: V-8
Bore x Stroke: 3.6 in. x 3.4 in. (92 mm x 86 mm)
Displacement: 4.6 L
Starting: Electric Start with SmartStart Protection
Dimensions
Shaft Length: 25 in. (635 mm)
Weight: 505 lb. (229 kg)
General
Trim Method: Power trim and tilt
Propshaft Horsepower: 200 hp (149 kW)
Full Throttle Operating Range: 5600-6200 rpm
Gear Ratio / Shift: 1.75:1 / F-N-R
Fuel Induction: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
Alternator: 85 Amp / 1071 Watt with Idle Charge
Cooling: Water-cooled with thermostat
Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
Features
- Engine Details: Maximized power, torque and overall performance for spectacular acceleration and top speed. Great for bass and multi-species fishing boats.
- Take it to the Limit: No outboard gets from zero to wide-open quicker than a Mercury Pro XS, now with V8 4.6-liter and V6 3.4-liter muscle. This is performance that will rocket your rig out of the hole and to the next hot spot in a blur. These Pro XS models feature generous displacement in a performance-tuned powerhead with a deep-breathing double-overhead-cam design and long-runner intake tract that delivers instant throttle response at any speed.
- Discover better boating: Active Trim by Mercury makes boating easier and more enjoyable by automatically trimming your engine. Active Trim simplifies boat operation while improving engine performance and decreasing fuel costs.
Specifications
- HP / kW: 200 / 149
- Engine type: V-8
- MidSection: Conventional MidSection
- Displacement (CID/CC): 279 CID
- Displacement (L): 4.6L
- Cylinder Configuration: V-8 [64 degree] with Dual Overhead Cam [DOHC] and 32-valves
- Full throttle RPM: 5600-6200
- Air induction: Performance-Tuned Long-Runner Intake Manifold
- Fuel induction system: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
- Alternator amp / Watt: 85-amp (1071 Watt) with Idle Charge
- Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum
- Recommended oil: NMMA Certified FCW SAE 10W-30
- Engine protection operator warning system: SmartCraft Engine Guardian
- Compatible with SmartCraft digital technology: Yes
- Starting: Electric Start with SmartStart Protection
- Controls: Remote Mechanical or Digital Throttle & Shift (DTS)
- Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
- Shaft length: 25″ / 635 mm
- Gearcase ratio: 1.75:1
- Dry weight: 505 lbs / 229 kgs
- CARB star rating: 3
- Bore and stroke: 3.6 in x 3.4 in / 92 mm x 86 mm
- Ignition: SmartCraft PCM 112 Digital Inductive
- Cooling system: Water-cooled with thermostat
- Gear shift: F-N-R
- Gearcase options: 5.44″
- Trim system: Power trim and tilt
- Exhaust system: Through prop
- Color: Phantom Black
- Lubrication system: Wet sump
- Oil Capacity: 7.0 Quarts / 6.6 Liters
- Maximum Trim Range: 20° (-6° to 14°)
- Maximum Tilt Range: 73° (-6° to 67°)
Add to Wishlist
Add to Wishlist
2020 Mercury 200XL Pro XS
Engine
Engine Type: V-8
Bore x Stroke: 3.6 in. x 3.4 in. (92 mm x 86 mm)
Displacement: 4.6 L
Starting: Electric Start with SmartStart Protection
Dimensions
Shaft Length: 25 in. (635 mm)
Weight: 505 lb. (229 kg)
General
Trim Method: Power trim and tilt
Propshaft Horsepower: 200 hp (149 kW)
Full Throttle Operating Range: 5600-6200 rpm
Gear Ratio / Shift: 1.75:1 / F-N-R
Fuel Induction: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
Alternator: 85 Amp / 1071 Watt with Idle Charge
Cooling: Water-cooled with thermostat
Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
Features
- Engine Details: Maximized power, torque and overall performance for spectacular acceleration and top speed. Great for bass and multi-species fishing boats.
- Take it to the Limit: No outboard gets from zero to wide-open quicker than a Mercury Pro XS, now with V8 4.6-liter and V6 3.4-liter muscle. This is performance that will rocket your rig out of the hole and to the next hot spot in a blur. These Pro XS models feature generous displacement in a performance-tuned powerhead with a deep-breathing double-overhead-cam design and long-runner intake tract that delivers instant throttle response at any speed.
- Discover better boating: Active Trim by Mercury makes boating easier and more enjoyable by automatically trimming your engine. Active Trim simplifies boat operation while improving engine performance and decreasing fuel costs.
Specifications
- HP / kW: 200 / 149
- Engine type: V-8
- MidSection: Conventional MidSection
- Displacement (CID/CC): 279 CID
- Displacement (L): 4.6L
- Cylinder Configuration: V-8 [64 degree] with Dual Overhead Cam [DOHC] and 32-valves
- Full throttle RPM: 5600-6200
- Air induction: Performance-Tuned Long-Runner Intake Manifold
- Fuel induction system: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
- Alternator amp / Watt: 85-amp (1071 Watt) with Idle Charge
- Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum
- Recommended oil: NMMA Certified FCW SAE 10W-30
- Engine protection operator warning system: SmartCraft Engine Guardian
- Compatible with SmartCraft digital technology: Yes
- Starting: Electric Start with SmartStart Protection
- Controls: Remote Mechanical or Digital Throttle & Shift (DTS)
- Steering: Big Tiller (optional); Hydraulic (standard); Power (optional)
- Shaft length: 25″ / 635 mm
- Gearcase ratio: 1.75:1
- Dry weight: 505 lbs / 229 kgs
- CARB star rating: 3
- Bore and stroke: 3.6 in x 3.4 in / 92 mm x 86 mm
- Ignition: SmartCraft PCM 112 Digital Inductive
- Cooling system: Water-cooled with thermostat
- Gear shift: F-N-R
- Gearcase options: 5.44″
- Trim system: Power trim and tilt
- Exhaust system: Through prop
- Color: Phantom Black
- Lubrication system: Wet sump
- Oil Capacity: 7.0 Quarts / 6.6 Liters
- Maximum Trim Range: 20° (-6° to 14°)
- Maximum Tilt Range: 73° (-6° to 67°)
Add to Wishlist
Add to Wishlist
Need Help?
+1 (650) 525 4464
Monday – Friday 8:00am-6:00pm (GMT-08:00) Pacific Standard Time (Los Angeles).
Email: info@shcontinentalmarine.com
Address: 948 W Patapsco Ave, Baltimore, MD 21230
S.H Continental Marine
- Free delivery
- Best of all offers
Copyright 2022.KlbTheme . All rights reserved