2019 YAMAHA 8 HP F8SMHB OUTBOARD MOTOR
Engine
- Engine Type: 2-cylinder
- Displacement: 212cc (12.9ci)
- Bore & Stroke: 56mm x 43mm (2.2 x 1.69 in.)
- RPM Range: 5000-6000
- Compression Ratio: 9.46:1
- Induction System: SOHC
- Alternator Output: 12V / 6 Amps
- Fuel Delivery: Carburetor (1)
- Starting: Manual (Electric Starter Kit available)
- Ignition: CDI Micro-Computer
- Lubrication: Wet sump
- Degree of Trim/Tilt: 4 positions/70 deg.
- Exhaust: Through Prop / Water Cooled Lab
- Cooling: Water/Thermostatic Control
- Gear Shift: Tiller Mount F/N/R
- Gear Ratio: 13/27 (2.08)
Dimensions
- Shaft Length: 20″
- Dry Weight: 39 kg (87 lb.)
Add to Wishlist
Add to Wishlist
2019 YAMAHA 8 HP F8LMHB OUTBOARD MOTOR
Specifications
- Engine Type: Yamaha F8LMHB Four Stroke
- Horsepower: 8 hp
- Cylinders: 2 cyl
- Shaft Length: 20″
- Steering: Tiller
- Starter: Manual
- Weight: 89 lbs
- Full Throttle Range: 5000 – 6000 rpm
- Displacement: 212cc
- Induction System: Carb
Add to Wishlist
Add to Wishlist
2020 YAMAHA 2.5 HP F2.5SMHB OUTBOARD MOTOR
Power/Performance- Streamlined Intake Manifold
- Long Span Mounting System
- Four Stroke Engine Design
- California C.A.R.B. Ultra Low Emissions 3 Star Rating
- Meets all current Federal EPA Emission Standards
- Overhead Valve (OHV) Design
- 2-Valves Per Cylinder
- Precise Carburetor Setting
- Short Stroke Engine Design
- Rubber Dampened Tiller Handle
- Compact Offset Crankshaft
- Phaze Five™ Paint System
- Stainless Steel Driveshaft, Prop Shaft, Shift Shaft and Steering Tube
- Sacrificial Anodes
- Splined Prop Shaft
- TCI Ignition
- Splash Lubrication
- YDC Aluminum Alloy
- Cast Iron Camshaft
- Water Resistant Fuel Tank Cap
- Dual Transom Clamps
- Multiple Gripping Points
- Decompression Device
- Built-In Fuel Tank
- 360° Swivel Steering
- F/N Shift
- Tilt Up Engine Stopping Device
- Pilot Water Blocking Device
- Split Bottom Cowling
Add to Wishlist
Add to Wishlist
2020 YAMAHA 2.5 HP F2.5LMHB OUTBOARD MOTOR2.5
NEW YAMAHA 2.5 LMHB FOUR STROKE MOTOR Engine Type One Cylinder Displacement 4.4 ci (72 cc) Bore x Stroke 54 x 31.5mm (2.13 x 1.24 in) Prop Shaft Horsepower 2.5 hp @ 5500 rpm Compression Ratio 8.8:1 Fuel Induction Overhead Valve Exhaust Above Propeller Intake Carburetor Ignition TCI Spark Plug CR6HSB-000-000 Alternator Output N.A. Starting System Manual Engine Oil Capacity 0.35L(0.37qt) Full Throttle RPM Range 5250 ~ 5750 rpm Cooling Water/Thermostatic Control Recommended Engine Oil Yamalube® 4M (See Owner’s Manual) Recommended Fuel Regular Unleaded (Minimum Pump Octane 87) Recommended Fuel Filtration Yamaha Mini 10-Micron Fuel/Water Separating Filter (external) Gear Ratio 2.01:1 Gear Shift Forward, Neutral Shaft Length S=15″, L=20″ Degree of Tilt 79° Degree of Trim 4 positions C.A.R.B. Rating 3-Star Dry Weight F2.5SMHB = 17kg (37 lbs), F2.5LMHB = 18kg (40 lbs) Steering Angle (maximum) 360° from center, either direction
Add to Wishlist
Add to Wishlist
Yamaha E75BMHL Outboard Engine 2-Stroke
Add to cart
We are committed to providing the best in customer service. Please feel free to contact us for assistance. All information received will always remain confidential.
Add to Wishlist
Add to Wishlist
Used Yamaha 25hp Long Shaft
4 stroke, long shaft, recoil start and manual tilt. Comes with Yamaha remote control box, fuel tank and fuel line. Weighing 80kgs. Control cables and fitting not included.
This outboard is ideal for a small day boat. Used Yamaha 25hp Long Shaft
Add to Wishlist
Add to Wishlist
Used Yamaha 2.5hp Long Shaft
2004, 4 stroke, long shaft, tiller handle, recoil start, internal fuel tank only.
Add to cart
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Used Suzuki 2.5hp Short Shaft
Add to cart
2021 model. 4 stroke, short shaft, tiller handle, recoil start, internal tank only. This engine comes fully serviced with Suzuki Manufacturers Warranty.
Add to Wishlist
Add to Wishlist
Used Parsun 9.8hp Long Shaft
Add to cart
4 Stroke, Long Shaft, Remote Control. Comes with side mount control box, loom, fuel tank and fuel line. Fitting not included
This engine is in excellent condition.
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Used Mariner 15hp Long Shaft
Add to cart
Mariner 15hp MLH model, 2015, 4 stroke. Long shaft, tiller handle, recoil start.
Very popular outboard model and ideal for small fishing vessels.
Add to Wishlist
Add to Wishlist
Used Evinrude 30hp ETEC Long Shaft
Add to cart
Evinrude ETEC 2009, 2/stroke, long shaft, remote control. Comes with fuel tank & line, side mount control box.
This engine is in great condition with under 50hrs use.
New high pressure fuel pump has been fitted and the engine serviced.
Fitting and control cables not included
Add to Wishlist
Add to Wishlist
2020 MERCURY 9.9 HP 9.9MXLH-CT OUTBOARD MOTOR
The Mercury 9.9 HP Outboard motor with 25 inch extra long shaft and Command Thrust delivers power, thrust, and control that wider, heavier boats need. A larger prop increases control and a taller gear case puts the propeller deeper below turbulent water for improved power. The Mercury 9.9 outboard engine is the right choice for sailboat and kicker applications. The 9.9 HP Mercury Outboard Motor model: 9.9MXLH-CT is an affordable outboard equipped with an extra long 25 inch shaft and manual start,- Compact and Lightweight
- Designed for Heavy Applications
- CommandThrust Lower Unit (2.42:1 Gear Ratio)
- High Thrust Propeller
- Oversized Anti-Ventilation Plate
- Digital CD Ignition with Spark Advance
- High Grade Marine Alloy Construction
- Stainless Steel Water Pump Housing
- Zinc Coated Water Passages
- Rated for Saltwater Use
- Sacrificial Zinc Anodes and Trim Tab
- Tiller Integrated F-N-R Gear Shifting
- Adjustable Steering Tension Control
- Twist-Grip Throttle with Tension Control
- Thermostat Controlled Water Cooling
- Auto Ratchet Trim System (5 positions)
- Shallow Water Drive
- Quiet Through-Propeller-Hub Exhaust
- 3.2 Gallon Fuel Tank and Fuel Line
- Start-In-Gear Protection
- Low Oil Pressure Warning Indicator
- ESG Over-Rev Protection
- Safety Lanyard Stop Switch
- Owner’s Manual
| MODEL | 9.9MXLH-CT |
|---|---|
| MODEL YEAR | 2020 |
| SKU | 9.9MXLH-CT-20 |
| WEIGHT | 99.0 lb |
| MANUFACTURER | Mercury |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 9.9hp |
| SHAFT LENGTH | 25″ (Extra Long) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 208 cc (12.8 cubic inches) |
| BORE AND STROKE | 55 x 44 mm (2.16 x 1.73 inches) |
| FULL THROTTLE RPM RANGE | 5000-6000 |
| IGNITION SYSTEM | Digital CD Ignition w/Electronic Spark Advance |
| INDUCTION SCAVENGING | SOHC |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | 87 Octane (up to 10% ethanol content) |
| FUEL TANK / FUEL LINE | 3.2 Gal. Fuel Tank + Quick Connect Fuel Line |
| OIL TYPE | SAE 10W-30 (Mercury 4-Stroke Outboard Oil) |
| OIL CAPACITY | 27 fl. Oz. (800 ml) |
| LUBRICATION | Trochoid Pump |
| ALTERNATOR | Optional 12V 76W 6A (installation required) |
| COOLING SYSTEM | Water-Cooled, Thermostatically Controlled |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.42:1 CommandThrust Gearcase |
| GEAR SHIFT | Forward-Neutral-Reverse (shift in tiller handle) |
| PROPELLER | CommandThrust 4-Blade High Thrust Aluminum Propeller |
Add to Wishlist
Add to Wishlist
2020 MERCURY 9.9 HP 9.9MXLH OUTBOARD MOTOR
The Mercury 9.9 outboard engine is the right choice for sailboat and kicker applications. The 9.9 HP Mercury Outboard Motor model# 9.9MXLH is an affordable outboard, equipped with an extra long 25 inch shaft and manual start,- Compact and Lightweight
- Digital CD Ignition with Spark Advance
- High Grade Marine Alloy Construction
- Stainless Steel Water Pump Housing
- Zinc Coated Water Passages
- Rated for Saltwater Use
- Sacrificial Zinc Anodes and Trim Tab
- Tiller Integrated F-N-R Gear Shifting
- Adjustable Steering Tension Control
- Twist-Grip Throttle with Tension Control
- Thermostat Controlled Water Cooling
- Auto Ratchet Trim System (5 positions)
- Shallow Water Drive
- Quiet Through-Propeller-Hub Exhaust
- 3.2 Gallon Fuel Tank and Fuel Line
- Start-In-Gear Protection
- Low Oil Pressure Warning Indicator
- ESG Over-Rev Protection
- Safety Lanyard Stop Switch
- Owner’s Manual
| MODEL | 9.9MXLH |
|---|---|
| MODEL YEAR | 2020 |
| SKU | 9.9MXLH-20 |
| WEIGHT | 89.0 lb |
| MANUFACTURER | Mercury |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 9.9hp |
| SHAFT LENGTH | 25″ (Extra Long) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 208 cc (12.8 cubic inches) |
| BORE AND STROKE | 55 x 44 mm (2.16 x 1.73 inches) |
| FULL THROTTLE RPM RANGE | 5000-6000 |
| IGNITION SYSTEM | Digital CD Ignition w/Electronic Spark Advance |
| INDUCTION SCAVENGING | SOHC |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | 87 Octane (up to 10% ethanol content) |
| FUEL TANK / FUEL LINE | 3.2 Gal. Fuel Tank + Quick Connect Fuel Line |
| OIL TYPE | SAE 10W-30 (Mercury 4-Stroke Outboard Oil) |
| OIL CAPACITY | 27 fl. Oz. (800 ml) |
| LUBRICATION | Trochoid Pump |
| ALTERNATOR | Optional 12V 76W 6A (installation required) |
| COOLING SYSTEM | Water-cooled with thermostat |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.08:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (shift in tiller handle) |
| PROPELLER | 8.5″ Diameter X 8.0″ Pitch 3-Blade Aluminum |
Add to Wishlist
Add to Wishlist
S.H Continental Marine
Our team is dedicated to providing exceptional customer service.
Email: info@shcontinentalmarine.com
Choose S.H Continental Marine for your outboard engine needs and enjoy superior quality, exceptional customer service, and unbeatable prices.
Need Help?
+1 (650) 525 4464
Monday – Friday 8:00am-6:00pm (GMT-08:00) Pacific Standard Time (Los Angeles).
Email: info@shcontinentalmarine.com
Address: 948 W Patapsco Ave, Baltimore, MD 21230
S.H Continental Marine
- Free delivery
- Best of all offers
Copyright 2025.KlbTheme . All rights reserved