Used Mercury 225hp Optimax XL Shaft for sale

In Stock

$6,450.00

Used Mercury 225hp Optimax XL Shaft: pre-owned 225 HP Mercury outboard

  • Engine: two-stroke direct fuel injection (OptiMax), V6
  • Shaft: 25 in
  • Starting: electric start
  • Steering: remote
  • Condition: used
In Stock

Did you like this product? Add to favorites now and follow the product.

Add to wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Easy Returns.

Quick & Hassle Free

Description

The Used Mercury 225hp Optimax XL Shaft is a pre-owned 225 HP Mercury two-stroke outboard with a 25-inch shaft, remote steering and electric start. It suits center consoles, bass and bay boats, and offshore boats and offers Mercury engineering at a lower price than a new engine.

Condition and What Is Included

The listing describes a used Mercury 225 HP OptiMax with a 25-inch (XL) shaft. OptiMax is Mercury’s direct-injection two-stroke, which injects fuel directly into the cylinders for cleaner running and better economy than older carburetted two-strokes.

As with any used engine, ask us for current photos, the engine hours where available, compression readings and any service records before you buy. Our used outboard checklist explains what to look for.

Key Features of the Used Mercury 225hp Optimax XL Shaft

Mercury is one of the largest outboard makers in the world, with a wide dealer and parts network, which helps keep an older engine like the OptiMax running.

As a two-stroke, this engine has a high power-to-weight ratio and a simple design, but it needs two-stroke oil, either premixed with the fuel or from an oil-injection tank depending on the set-up.

Remote control

This engine is set up for remote control from a console. Plan for compatible controls, cables, steering and gauges.

Who the Used Mercury 225hp Optimax XL Shaft Suits

A used 225 HP Mercury like this is a good way to power center consoles, bass and bay boats, and offshore boats on a budget. Buying used makes most sense when the engine’s history is clear and you are comfortable with basic maintenance. Our guides on buying used outboard motors and what separates a good used deal from a bad one are worth reading before you decide.

Used Mercury 225hp Optimax XL Shaft Specifications

  • Output: 225 HP
  • Engine: two-stroke direct fuel injection (OptiMax), V6
  • Shaft length: 25 in
  • Starting: electric start
  • Steering: remote
  • Condition: used

Original manufacturer information is available on Mercury Marine’s website.

Before You Buy the Used Mercury 225hp Optimax XL Shaft

  • Measure your transom to confirm the 25-inch shaft suits your boat.
  • Check your boat’s capacity plate allows 225 HP and the engine weight.
  • Ask for a compression test result and check the gearcase oil for water or metal particles.
  • Plan a fresh service on arrival: oils, filters, plugs and, if its history is unknown, the water pump impeller.
  • Choose the right propeller with our propeller buying guide.

How the Used Mercury 225hp Optimax XL Shaft Performs on the Water

The Used Mercury 225hp Optimax XL Shaft belongs to the high-horsepower class used on offshore center consoles, walkarounds and twin- or triple-engine rigs. At 225 HP per engine it is designed to accelerate a heavy, fully fuelled boat onto the plane quickly and to hold a fast cruise in open water. Smooth power delivery, strong charging output for electronics, and dependable cooling at sustained high load are what count in this class, more than the top-speed figure.

Real-world performance always depends on hull design, weight, trim and propeller choice. Two identical engines on different boats can feel quite different, so treat any speed you read about as a guide rather than a promise.

Is 225 HP the Right Size for Your Boat?

Start with the capacity plate fixed near the helm or transom of your boat. It states the maximum horsepower and the maximum engine weight the hull is rated for, and you should never exceed either. Within that limit, many owners choose an engine at 75 to 100 percent of the rated maximum, which usually gives the best mix of performance, economy and resale value. Think about your typical load too: the number of people, fuel, water, fishing or diving gear can easily add several hundred pounds.

At this power level many boats run twin engines. Twins give redundancy far from shore and better low-speed handling, while a single larger engine is lighter and cheaper to buy and maintain. If you plan a twin installation, pair standard- and counter-rotating engines so the boat tracks straight; our twin outboard set-up guide explains the details.

Choosing a Propeller for the Used Mercury 225hp Optimax XL Shaft

The propeller is the single biggest factor in how the Used Mercury 225hp Optimax XL Shaft performs on your boat. The goal is for the engine to reach the top of its rated full-throttle rpm range with a normal load. If it over-revs, fit a propeller with more pitch; if it cannot reach the range, reduce the pitch. As a rule of thumb, each inch of pitch changes full-throttle engine speed by roughly 150 to 200 rpm.

  • Aluminium propellers are affordable and a good choice for shallow or debris-filled water, where a strike is likely.
  • Stainless steel propellers cost more but flex less, keep their shape and often improve hole shot and top speed.
  • Rotation: Standard-rotation engines use a right-hand propeller; check the rotation marking before you buy a spare.

Keep a spare propeller and the fitting kit on board. For a fuller explanation of pitch, diameter and blade count, read our propeller buying guide.

Installing and Mounting the Used Mercury 225hp Optimax XL Shaft

Remote-control models like the Used Mercury 225hp Optimax XL Shaft need controls, a steering system, a fuel system, gauges and a correctly sized battery cable. Many owners have a qualified marine technician rig the boat, because control cable adjustment, steering set-up and wiring all affect safety and reliability.

Mounting height matters on every outboard. As a starting point, the anti-ventilation plate above the propeller should sit roughly level with the bottom of the hull. Set too low, the gearcase creates drag and spray; set too high, the propeller can ventilate and lose grip in turns. The 25-inch shaft on this model must match your transom height, measured from the top of the transom down to the bottom of the hull on the centreline. Our long shaft vs short shaft guide shows how to measure correctly.

Break-In and the First Hours

A new engine needs a careful break-in so the piston rings, bearings and gears bed in properly. Mercury sets out the exact procedure in the owner’s manual for the Used Mercury 225hp Optimax XL Shaft, and you should follow it closely. In general, most makers ask you to vary engine speed, avoid long periods at one rpm and avoid sustained full throttle for roughly the first ten hours. Many also recommend an early first service to change the engine oil and gear oil and check for leaks. Our outboard break-in guide walks through the process step by step.

Because this is a used engine, break-in has already been done. Instead, we recommend a full service before the first season: fresh engine and gear oil, new filters, plugs and water pump impeller if their history is unknown, and a careful check of the anodes and propeller. Our used outboard checklist covers what to inspect.

Fuel, Oil and Everyday Running

Use fresh, good-quality petrol of the octane listed in the owner’s manual for the Used Mercury 225hp Optimax XL Shaft. Petrol that contains ethanol absorbs water and goes stale over time, so add a marine fuel stabiliser if the boat will sit for more than a few weeks, and fit a water-separating fuel filter on boats with a built-in tank. This is a two-stroke engine, so it needs two-stroke oil: either premixed with the fuel or supplied from an oil-injection tank, depending on how the engine is set up. Use the oil type and ratio the manufacturer specifies, and never run it without oil.

Before each trip, check the fuel level and connections, make sure the kill-switch lanyard is attached, and confirm a strong stream of cooling water from the tell-tale outlet once the engine starts. After the trip, especially in salt water, flush the engine with fresh water and rinse the outside to slow corrosion.

Maintenance Schedule for the Used Mercury 225hp Optimax XL Shaft

Regular maintenance is the best way to keep the Used Mercury 225hp Optimax XL Shaft reliable for many seasons. The exact intervals for your engine are in the Mercury owner’s manual; the table below shows the kind of schedule most two-stroke outboards follow.

  • After every use: flush with fresh water, check for fuel or oil leaks and inspect the propeller.
  • First service (often around 20 hours): change the gear oil, and check bolts, connections and the oil supply.
  • Every 100 hours or once a year: gearcase oil, spark plugs, fuel filters, the oil-injection system where fitted, fuel filters, anodes and greasing points.
  • Every two to three years: replace the water pump impeller, or sooner if you run in sandy or silty water.
  • Larger engines: also check the timing belt or chain, thermostats and power trim fluid at the intervals the manual gives.

Keep a simple log of hours and services; it helps you plan work and supports resale value. See our Mercury outboard maintenance guide and our guide to lower unit oil for more detail.

Storage and Winterizing

If the Used Mercury 225hp Optimax XL Shaft will sit unused for more than a month or two, prepare it properly. Stabilise the fuel and run the engine so treated fuel reaches the injectors or carburettor, change the gear oil and check it for water, fog the cylinders if the manual recommends it, and grease the fittings. Leave the engine trimmed down so water drains from the gearcase and cooling passages. Remove or maintain the battery. Our Mercury winterizing guide lists each step.

Troubleshooting Common Issues

Most problems on a well-maintained outboard have simple causes. Check these first before booking a technician:

  • Hard starting: stale or contaminated fuel, a blocked fuel filter, a loose kill-switch lanyard, a weak battery or a pinched fuel line.
  • No water from the tell-tale: stop the engine and check for a blocked outlet, weed on the water intake or a worn water pump impeller.
  • Vibration: a damaged or fouled propeller, or debris wrapped round the propeller shaft.
  • Loss of power: fuel restriction, a fouled spark plug, the wrong propeller or too much load. On electronic engines, warning lights or gauge alerts point to the fault.
  • Ventilation in turns: mounting height or trim may need adjusting.

If a warning alarm sounds, reduce throttle, stop when it is safe and investigate before running again. Persistent faults should be checked by a qualified technician.

How the Used Mercury 225hp Optimax XL Shaft Compares With Other Options

As a remote-control engine, the Used Mercury 225hp Optimax XL Shaft suits boats with a console. If you have a small open boat with no console, a tiller version of a similar engine can save rigging cost and weight.

Shaft length is the other key choice. This model has a 25-inch shaft; other versions of the same engine are available in different lengths to suit lower or higher transoms. For twin installations, a counter-rotating version of the same engine is usually paired with this one. Across brands, Mercury competes closely with the other leading outboard makers on reliability, fuel economy and service support, so the best choice often comes down to dealer access where you boat, controls and gauges already on the boat, and the specific features you value. Our outboard brands comparison sets out the main differences.

Getting the Best Fuel Economy From the Used Mercury 225hp Optimax XL Shaft

Fuel is one of the biggest running costs of any boat, and a few habits make a real difference. First, trim the engine so the bow lifts slightly and the boat runs on the flattest part of the hull; too much trim makes the propeller ventilate, too little pushes the bow into the water. Second, find the boat’s most efficient cruising speed, usually just above the point where it planes cleanly, rather than running near full throttle. Third, spread the load evenly and avoid carrying weight you do not need, such as full water tanks or unused gear.

A clean hull and a propeller in good condition also save fuel: marine growth, dents and bent blades all increase drag. Many engines in this class can display fuel flow on a digital gauge, which makes it easy to find the most economical rpm for your boat with the Used Mercury 225hp Optimax XL Shaft fitted. Our guides to outboard fuel efficiency and four-stroke outboards go into more detail.

Controls, Gauges and Electronics

A remote-control engine like the Used Mercury 225hp Optimax XL Shaft connects to a binnacle or panel control at the helm, plus gauges that show engine speed, trim, temperature, fuel and alerts. Modern engines often send this data over a digital network, so a compatible multifunction display can show it alongside your chartplotter and sonar. Use correctly sized battery cables, a battery switch and good-quality marine connectors, and route wiring away from fuel lines and moving parts.

Whatever the set-up, test the kill switch and the neutral-start safety feature regularly. If the engine will start in gear or the lanyard does not stop it, have it repaired before you go out.

Safety Equipment and Good Habits

A reliable engine is only part of safe boating. Before every trip with the Used Mercury 225hp Optimax XL Shaft, check the weather and tell someone where you are going and when you expect to return. Carry the safety equipment your local rules require, which usually includes lifejackets for everyone on board, a fire extinguisher, a sound signal, navigation lights and a way to call for help such as a VHF radio. A paddle or a small auxiliary engine, a spare propeller, spare fuel, a basic tool kit, a spare kill-switch lanyard, plugs and a fuel filter can turn a breakdown into a short delay.

Always wear the kill-switch lanyard while the engine is running, keep people well clear of the propeller when anyone is in the water, and never run the engine in an enclosed space because exhaust gases are dangerous.

Long-Term Ownership and Resale Value

Outboards from the major brands hold their value well when they are cared for. To get the most from the Used Mercury 225hp Optimax XL Shaft over its life, keep every service receipt in one place, use genuine or manufacturer-approved parts and oils, and record engine hours at each service. Fit a cover when the boat is stored, keep the anodes in good condition, and touch up chipped paint on the gearcase before corrosion starts. A well-documented engine is easier to sell, and buyers will pay more for one with a clear history.

If you ever upgrade, a clean, well-maintained Used Mercury 225hp Optimax XL Shaft is also a strong candidate for trade or private sale. Our guide on buying used outboard motors explains what buyers look for, which is useful to know as an owner too.

Typical Uses for the Used Mercury 225hp Optimax XL Shaft

Owners choose the Used Mercury 225hp Optimax XL Shaft for a wide range of jobs. Some of the most common are:

  • Offshore fishing trips far from shore
  • Fast cruising between islands or along the coast
  • Twin and triple installations on large center consoles
  • Commercial, charter and patrol work that demands sustained high power

Whatever you use it for, the same basics apply: match the engine to the boat’s rating, choose the right propeller, keep up with servicing and treat the fuel well. Do that, and the Used Mercury 225hp Optimax XL Shaft should give you dependable, economical running season after season. If you are unsure whether it suits your plans, tell us about your boat and how you use it, and we will help you decide.

First-Trip Checklist for the Used Mercury 225hp Optimax XL Shaft

Before you take the Used Mercury 225hp Optimax XL Shaft out for the first time, run through a simple checklist. It takes a few minutes and catches most of the problems that spoil a first outing.

  • Confirm the engine is securely mounted and the mounting bolts or clamp screws are tight.
  • Check the engine oil level and the gearcase oil, as the engine may have been shipped with minimal oil; follow the owner’s manual.
  • Check that the fuel line, primer bulb and connectors are secure and that there are no leaks.
  • Make sure the propeller is the right one for your boat, correctly fitted and secured with its nut and cotter pin or locking tab.
  • Test the kill-switch lanyard, the neutral-start safety and the steering from lock to lock.
  • Run the engine in the water and confirm a steady stream from the cooling-water tell-tale before you leave the dock.
  • Keep the first outing short and close to shore, and follow the break-in instructions.

Any issue that appears on the first trip is far easier to sort out close to home. If you have questions at any stage, contact us and we will help.

Ordering and Delivery

Delivery times and costs depend on your location and the shipping method; the details are on our shipping policy page. When the Used Mercury 225hp Optimax XL Shaft arrives, inspect the crate or packaging before signing, note any visible damage on the delivery receipt and take photos. Check the model code on the engine’s identification plate against your order, and keep all paperwork, as you will need it for registration and future service. If you have any questions about what is included, such as a propeller, controls or a fuel tank, contact us before you order.

Frequently Asked Questions About the Used Mercury 225hp Optimax XL Shaft

What boats is the Used Mercury 225hp Optimax XL Shaft suited to?

It is best suited to offshore center consoles, walkarounds and multi-engine rigs, within the limits on your boat’s capacity plate.

Can I use it in salt water?

Yes. Like other modern marine outboards, the Used Mercury 225hp Optimax XL Shaft is designed for both fresh and salt water. After saltwater use, flush the engine with fresh water and check the anodes regularly.

What fuel does it use?

It runs on unleaded petrol of the octane given in the owner’s manual. As a two-stroke, it needs two-stroke oil, either premixed or from an oil-injection tank.

How often does it need servicing?

Most outboards need a first service after their break-in hours and then a full service every 100 hours or once a year, whichever comes first. Check the Mercury owner’s manual for the exact schedule.

How do I choose the shaft length?

Measure from the top of the transom to the bottom of the hull on the centreline. About 15 inches suits a short shaft, 20 inches a long shaft, 25 inches an extra-long shaft and 30 inches an ultra-long shaft.

How long will it last?

With regular servicing, correct storage and sensible use, a well-maintained outboard can give many years of reliable service. Engine hours, maintenance history and how hard it has been run matter more than age alone.

Can I fit it myself?

Remote-control engines involve controls, steering, fuel and electrical work, so we recommend a qualified marine technician for the installation.

Is a propeller included?

Supply varies by model and listing. Please contact us before ordering and we will confirm exactly what comes with the engine.

More Outboards and Buying Guides

The current Used Mercury 225hp Optimax XL Shaft price is shown on this page. Check our shipping policy and returns policy, compare the full used outboard engines, or contact us with any fit or rigging questions.