Description

Used Evinrude 30hp ETEC Long Shaft for Sale

Strong, Fuel Savvy, and Ready to Ship — Buy Your Fully Serviced Evinrude 30hp Long Shaft Today

Looking for a Reliable Used Outboard Motor?

Do you want a reliable and high-performance used outboard motor for your boat? Search no further. We are offering used Evinrude 30hp ETEC Long Shaft outboard motors, serviced, load-tested, and limited-time warranted. They are an upper-tier choice for small to mid-size boats that need power, performance, and long shaft construction for better water penetration and smooth handling.

No matter if you’re fitting a tender, sailboat, skiff, RIB, or fishing boat, the Evinrude 30hp ETEC Long Shaft outboard offers state-of-the-art power at a fraction of the cost. And with us, buying is not just buying a second-hand engine—you’re buying a reconditioned outboard that has been thoroughly tested, certified, and shipped with care to anywhere in the world.

Why Choose the Evinrude 30hp ETEC Long Shaft Outboard?

✅ Direct Fuel Injection for Maximum Efficiency

The Evinrude 30hp ETEC is a direct fuel injection (DFI) 2-stroke outboard, which delivers better fuel economy, more power per stroke, and reduced emissions compared to earlier carbureted engines. It’s the best balance of engine efficiency and environmental responsibility.

✅ Long Shaft Configuration

With its 20-inch shaft length, this outboard motor is ideal for high transom boats. This prevents cavitation, maintains the propeller fully submerged, and offers smoother boating in choppy or rough water.

✅ Lightweight and Compact

Weighing around 65–75 kg (143–165 lbs), the Evinrude 30hp ETEC is light and transportable for its height, perfect for boaters who require mobility and effortless setup. With all the serious thrust and torque in a compact package, don’t be deceived by its light weight.

✅ Electric Start and Trim Options

As noted in the unit, our available used Evinrude 30hp ETEC Long Shaft motors come with electric start, power trim and tilt, and remote control options. These offer convenience and additional control, particularly when docking or maneuvering in tight areas.

Our Used Evinrude 30hp ETEC Motors – Why They’re Exceptional?

We don’t just sell outboards—we recondition, test, and warrant each motor before sale. Buying from us gets you a well-serviced and professionally checked Evinrude outboard motor you can rely on.

🔧 Reconditioned and Fully Serviced

Each Evinrude 30hp engine undergoes a strict 7-step reconditioning:

• Compression testing – Verifies internal components’ health

• Fuel system cleaning – Removes gunk, junk, and varnish

• Spark plug replacement – Smooth ignition

• Lower unit inspection, gear oil change, pressure test, and seal inspection

• Water pump/impeller inspection – A cooling function

• Electronic diagnostic – Tests ignition circuit and sensors

• Live tank test – Boating condition simulated to confirm performance

All such engines that go through all these stages are available for purchase.

✅ Limited Warranty Included

We include a limited labor and parts warranty on every engine. Our rebuilt outboards’ quality control lets you confidently purchase.

🌍 International Shipping Available

We ship internationally to the USA, Canada, UK, Europe, Australia, New Zealand, South Africa, and more. Your engine is hand-crated, insured, and tracked.

Product Specifications – Evinrude 30hp ETEC Long Shaft

What’s Included When You Buy?

Every used Evinrude 30hp ETEC Long Shaft outboard motor comes with:

• ✅ Reconditioned and tested engine

• ✅ Pitted propeller

• ✅ New spark plugs and gear oil

• ✅ Compression test report

• ✅ Warranty certificate

• ✅ Owner’s manual (printed or digital)

• ✅ Mount and install support

• ✅ Crating and insured worldwide shipping

Best Applications of the Evinrude 30hp Long Shaft

The long shaft 30hp engine is very versatile. It’s best for:

• ✅ Sailboats and auxiliary engines

• ✅ Inflatable RIBs

• ✅ High-transom skiffs or tenders

• ✅ Light pontoons

• ✅ Small commercial workboats

• ✅ Patrol and rescue boats

• ✅ Jon boats and aluminum fishing boats

Its quietness, high torque, and efficiency make it ideal to use in light commercial and recreational applications.

Our Reconditioning Process – Quality You Can See

We employ a routine multi-point reconditioning process to ensure every Evinrude motor we sell exceeds stringent performance standards.

Step-by-Step Process:

1. Initial Condition Assessment
   Exterior damage inspection, prop condition check, cowling inspection, and general wear check.

2. Compression & Diagnostic Testing
   Check for healthy pistons, rings, and valves, and conduct electronic scans.

3. Fuel System Service
   Clean fuel injectors, replace lines if required, and check the fuel pump.

4. Gearcase & Impeller
   Drain and re-fill gear oil, inspect for leaks, and test water pump integrity.

5. Tuning and Repairs
   Install new plugs, time, idle speed adjust, and inspect trim/tilt function.

6. Live Testing
   Test engine in test tank to simulate load and use.

7. Final Inspection
   Polish and clean exterior, inspect throttle/shift function, finish packaging.

Customer Testimonials – Proven Satisfaction

“I needed a reliable backup for my sailboat. The Evinrude 30hp Long Shaft did the job beautifully. Compression was good, and the warranty was reassuring.”
— Liam S., Auckland, NZ

“Great motor. Spurred first time and then run like clockwork ever since. And speedy international shipping too. Well recommended.”
— James P., British Columbia, Canada

“Bought for my RIB. Arrived in the UK in good time. Even helped with the propeller match.”
— Alison M., Cornwall, UK

How to Buy – Fast, Safe, and Easy

Step 1: Contact Us

Share your boat details and where it is with us. We will confirm stock availability and offer you a free quote, including delivery.

Step 2: Order Confirmation

Once we’ve confirmed the quote, we offer you a full invoice. Payment by credit card, PayPal, or international bank transfer.

Step 3: Delivery

Your motor is insured, crated, packaged, and shipped. You get an estimated delivery time and tracking.

Post-Sale Support and Maintenance Tips

We offer full support even after the sale. You will get:

• ✅ Setup and connection guidelines

• ✅ Maintenance tips

• ✅ Parts and upgrade recommendation assistance

• ✅ Service kits on request available

Maintenance Tips for Reliable Operation in the Long Run:

• 🚿 Flush with cold water after every use

• 🔋 Charge battery regularly (if electric start)

• 🔧 Spark plugs replaced annually

• 🛠️ Change gear oil every 50 hours

• 💧 Check impeller every 100 hours

• ⛽ Fuel with clean, stabilized fuel

• 📦 Store in a cool, dry location

Frequently Asked Questions (FAQs)

Q: Are your Evinrude 30hp outboards tested prior to sale?
Yes, all units are compression tested, load tested, and serviced fully.

Q: Do you provide a warranty?
Yes. All engines are warranted with a limited parts and labor warranty.

Q: Will it fit my boat?
Most likely. Send us your boat data, and we’ll confirm compatibility.

Q: Do you ship internationally?
Yes. We ship internationally and track and insure each shipment.

Q: Do you provide installation assistance?
Yes. We provide phone installation guides and technical support.

Don’t Miss Out – Buy Your Used Evinrude 30hp ETEC Long Shaft Today

When you require a reliable, powerful, and efficient long shaft outboard, the used Evinrude 30hp ETEC Long Shaft is one of the best you can get. Our engines are completely reconditioned, tested, and warranted—shipped anywhere in the world—so you can get on the water worry-free.

✔️ Tested and rebuilt
✔️ Long shaft for high transoms
✔️ Lightweight and fuel-efficient
✔️ Global shipping and warranty
✔️ Ready to install and operate

Contact us today to check availability, get a quote, and reserve your Evinrude 30hp ETEC Long Shaft outboard motor. We’re here to make your boating experience smoother, more powerful, and more affordable.

Preowned Evinrude 30hp ETEC Long Shaft for Sale – Professionally Serviced, Tested, and Exported Worldwide with Warranty. Buy Now, Sail Tomorrow.