Yamaha 175 HP F175LA Outboard Motor

In Stock

$15,710.00

Yamaha F175LA: 175 HP 4-stroke outboard, 20-inch shaft, mechanical controls

  • Engine: 2,785 cc inline 4-cylinder, DOHC 16-valve, EFI
  • Shaft length: 20 in (L)
  • Weight: approx. 483 lb (219 kg)
  • Controls: mechanical throttle and shift; remote steering
  • Alternator: 50 A; electric start; power trim and tilt
  • Gear ratio: 1.86:1; full throttle 5,000 to 6,000 rpm
  • Use: bay boats, center consoles, pontoons and aluminium fishing boats
In Stock

Did you like this product? Add to favorites now and follow the product.

Add to wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Easy Returns.

Quick & Hassle Free

Description

The Yamaha 175 HP F175LA is a 2.8-litre, four-cylinder four-stroke outboard with mechanical throttle and shift and a 20-inch (L) shaft. At about 483 lb (219 kg), it’s one of the lighter engines you can put on a boat rated for 175 HP. That low weight is the main reason it’s so widely used on bay boats, center consoles, pontoons and aluminium fishing hulls.

Who the Yamaha 175 HP F175LA Suits

This model is the straightforward, cable-controlled version of Yamaha’s F175. It works well if your boat already has mechanical controls, if you want simple rigging that any marine technician can service, or if you’re repowering an older F150 or F175 and want to keep the existing control box. Owners who prefer electronic throttle and shift should compare the Yamaha F175LCA with Digital Electronic Control, which shares the same powerhead.

Yamaha 175 HP F175LA Specifications

  • Horsepower: 175 HP
  • Engine type: inline 4-cylinder, DOHC, 16 valves, 4-stroke
  • Displacement: 2,785 cc
  • Induction: electronic fuel injection
  • Full-throttle range: 5,000 to 6,000 rpm
  • Gear ratio: 1.86:1
  • Shaft length: 20 in (L)
  • Weight: approx. 483 lb (219 kg)
  • Alternator: 50 A
  • Starting: electric
  • Controls: mechanical throttle and shift
  • Steering: remote
  • Trim: power trim and tilt

What You Get With the F175LA

Light weight, good balance

Weight on the transom affects everything from how a boat sits at rest to how quickly it gets on plane. Keeping the F175 under 500 lb lets smaller hulls carry 175 HP without squatting at the stern, and it helps pontoons and aluminium boats stay level with passengers aboard.

A 50-amp alternator

Modern fishing boats run chartplotters, sonar, livewell pumps and lights. The 50-amp charging output gives you headroom to keep batteries topped up while you run, which is useful if you spend long days on the water with electronics switched on.

Simple mechanical rigging

Mechanical cables are familiar to most technicians, easy to inspect and inexpensive to replace. If you’re comparing the two control types, our article on Yamaha digital vs mechanical controls lays out the trade-offs.

Network-ready instrumentation

The Yamaha 175 HP F175LA can connect to Yamaha’s optional digital gauges, which add engine data and features such as variable trolling rpm control. You can see the full F175 range and its accessories on the Yamaha Outboards official site.

Choosing the Right F175 Variant

  • F175LA: 20-inch shaft, mechanical controls (this model)
  • Yamaha F175XA: the same engine with a 25-inch shaft for taller transoms
  • F175LCA: 20-inch shaft with Digital Electronic Control
  • VF175LA V MAX SHO: a performance-tuned version of the same 2.8-litre four for speed-focused boats

Before You Order

Measure your transom height to confirm a 20-inch shaft is right, check the maximum horsepower on your boat’s capacity plate, and decide which propeller pitch suits your usual load. Our guide to choosing a Yamaha outboard propeller explains how pitch affects acceleration and top speed. If you’re still weighing up brands and sizes, our guide to choosing a Yamaha outboard is a good place to start.

How the Yamaha 175 HP F175LA Performs on the Water

At 175 HP the Yamaha 175 HP F175LA is aimed at boats that need real performance with a full load: center consoles, bay boats, larger pontoons and family cruisers. It gives a strong hole shot, holds the plane at low cruising speeds, and keeps enough power in reserve for chop or a heavy load. Many owners run engines in this class at a fast, economical cruise for long distances, so smoothness and fuel use at mid-throttle matter more than the top-speed figure.

Performance on your boat will depend on hull type, load, trim and propeller. That is why we always suggest matching the propeller to the boat rather than relying on the one fitted at the factory.

Is 175 HP the Right Size for Your Boat?

Start with the capacity plate fixed near the helm or transom of your boat. It states the maximum horsepower and the maximum engine weight the hull is rated for, and you should never exceed either. Within that limit, an engine close to the rated maximum usually gives the best all-round performance, while a smaller engine saves weight and money but may struggle with a full load. Think about your typical load too: the number of people, fuel, water, fishing or diving gear can easily add several hundred pounds.

If you are repowering, compare the Yamaha 175 HP F175LA with the engine you are replacing. Changing the weight on the transom alters trim and how the boat sits in the water, so a large step up or down in weight may need a different propeller or a change in mounting height. Our repower cost guide helps you plan the whole job.

Choosing a Propeller for the Yamaha 175 HP F175LA

The propeller is the single biggest factor in how the Yamaha 175 HP F175LA performs on your boat. The goal is for the engine to reach the top of its rated full-throttle rpm range with a normal load. If it over-revs, fit a propeller with more pitch; if it cannot reach the range, reduce the pitch. As a rule of thumb, each inch of pitch changes full-throttle engine speed by roughly 150 to 200 rpm.

  • Aluminium propellers are affordable and a good choice for shallow or debris-filled water, where a strike is likely.
  • Stainless steel propellers cost more but flex less, keep their shape and often improve hole shot and top speed.
  • Rotation: Standard-rotation engines use a right-hand propeller; check the rotation marking before you buy a spare.

Keep a spare propeller and the fitting kit on board. For a fuller explanation of pitch, diameter and blade count, read our propeller buying guide.

Installing and Mounting the Yamaha 175 HP F175LA

Remote-control models like the Yamaha 175 HP F175LA need controls, a steering system, a fuel system, gauges and a correctly sized battery cable. Many owners have a qualified marine technician rig the boat, because control cable adjustment, steering set-up and wiring all affect safety and reliability.

Mounting height matters on every outboard. As a starting point, the anti-ventilation plate above the propeller should sit roughly level with the bottom of the hull. Set too low, the gearcase creates drag and spray; set too high, the propeller can ventilate and lose grip in turns. The 20-inch shaft on this model must match your transom height, measured from the top of the transom down to the bottom of the hull on the centreline. Our long shaft vs short shaft guide shows how to measure correctly.

Break-In and the First Hours

A new engine needs a careful break-in so the piston rings, bearings and gears bed in properly. The owner’s manual for the Yamaha 175 HP F175LA gives Yamaha’s exact break-in procedure, and it is worth following to the letter. In general, most makers ask you to vary engine speed, avoid long periods at one rpm and avoid sustained full throttle for roughly the first ten hours. Many also recommend an early first service to change the engine oil and gear oil and check for leaks. Our outboard break-in guide walks through the process step by step.

Fuel, Oil and Everyday Running

Use fresh, good-quality petrol of the octane listed in the owner’s manual for the Yamaha 175 HP F175LA. Petrol that contains ethanol absorbs water and goes stale over time, so add a marine fuel stabiliser if the boat will sit for more than a few weeks, and fit a water-separating fuel filter on boats with a built-in tank. Four-stroke engines like this one do not need oil mixed into the fuel, but you should check the engine oil level regularly and use the oil grade the manufacturer specifies.

Before each trip, check the fuel level and connections, make sure the kill-switch lanyard is attached, and confirm a strong stream of cooling water from the tell-tale outlet once the engine starts. After the trip, especially in salt water, flush the engine with fresh water and rinse the outside to slow corrosion.

Maintenance Schedule for the Yamaha 175 HP F175LA

Regular maintenance is the best way to keep the Yamaha 175 HP F175LA reliable for many seasons. The exact intervals for your engine are in the Yamaha owner’s manual; the table below shows the kind of schedule most four-stroke outboards follow.

  • After every use: flush with fresh water, check for fuel or oil leaks and inspect the propeller.
  • First service (often around 20 hours): change the engine oil and gear oil, and check bolts and connections.
  • Every 100 hours or once a year: engine oil and filter, gearcase oil, spark plugs, fuel filters, anodes and greasing points.
  • Every two to three years: replace the water pump impeller, or sooner if you run in sandy or silty water.
  • Larger engines: also check the timing belt or chain, thermostats and power trim fluid at the intervals the manual gives.

Keep a simple log of hours and services; it helps you plan work and supports resale value. See our Yamaha outboard maintenance guide and our guide to lower unit oil for more detail.

Storage and Winterizing

If the Yamaha 175 HP F175LA will sit unused for more than a month or two, prepare it properly. Stabilise the fuel and run the engine so treated fuel reaches the injectors or carburettor, change the engine oil so acidic old oil does not sit in the engine, change the gear oil and check it for water, fog the cylinders if the manual recommends it, and grease the fittings. Leave the engine trimmed down so water drains from the gearcase and cooling passages. Remove or maintain the battery. Our Yamaha winterizing guide lists each step.

Troubleshooting Common Issues

Most problems on a well-maintained outboard have simple causes. Check these first before booking a technician:

  • Hard starting: stale or contaminated fuel, a blocked fuel filter, a loose kill-switch lanyard, a weak battery or a pinched fuel line.
  • No water from the tell-tale: stop the engine and check for a blocked outlet, weed on the water intake or a worn water pump impeller.
  • Vibration: a damaged or fouled propeller, or debris wrapped round the propeller shaft.
  • Loss of power: fuel restriction, a fouled spark plug, the wrong propeller or too much load. On electronic engines, warning lights or gauge alerts point to the fault.
  • Ventilation in turns: mounting height or trim may need adjusting.

If a warning alarm sounds, reduce throttle, stop when it is safe and investigate before running again. Persistent faults should be checked by a qualified technician.

How the Yamaha 175 HP F175LA Compares With Other Options

As a remote-control engine, the Yamaha 175 HP F175LA suits boats with a console. If you have a small open boat with no console, a tiller version of a similar engine can save rigging cost and weight.

Shaft length is the other key choice. This model has a 20-inch shaft; other versions of the same engine are available in different lengths to suit lower or higher transoms. Across brands, Yamaha competes closely with the other leading outboard makers on reliability, fuel economy and service support, so the best choice often comes down to dealer access where you boat, controls and gauges already on the boat, and the specific features you value. Our outboard brands comparison sets out the main differences.

Getting the Best Fuel Economy From the Yamaha 175 HP F175LA

Fuel is one of the biggest running costs of any boat, and a few habits make a real difference. First, trim the engine so the bow lifts slightly and the boat runs on the flattest part of the hull; too much trim makes the propeller ventilate, too little pushes the bow into the water. Second, find the boat’s most efficient cruising speed, usually just above the point where it planes cleanly, rather than running near full throttle. Third, spread the load evenly and avoid carrying weight you do not need, such as full water tanks or unused gear.

A clean hull and a propeller in good condition also save fuel: marine growth, dents and bent blades all increase drag. Many engines in this class can display fuel flow on a digital gauge, which makes it easy to find the most economical rpm for your boat with the Yamaha 175 HP F175LA fitted. Our guides to outboard fuel efficiency and four-stroke outboards go into more detail.

Controls, Gauges and Electronics

A remote-control engine like the Yamaha 175 HP F175LA connects to a binnacle or panel control at the helm, plus gauges that show engine speed, trim, temperature, fuel and alerts. Modern engines often send this data over a digital network, so a compatible multifunction display can show it alongside your chartplotter and sonar. Use correctly sized battery cables, a battery switch and good-quality marine connectors, and route wiring away from fuel lines and moving parts.

Whatever the set-up, test the kill switch and the neutral-start safety feature regularly. If the engine will start in gear or the lanyard does not stop it, have it repaired before you go out.

Safety Equipment and Good Habits

A reliable engine is only part of safe boating. Before every trip with the Yamaha 175 HP F175LA, check the weather and tell someone where you are going and when you expect to return. Carry the safety equipment your local rules require, which usually includes lifejackets for everyone on board, a fire extinguisher, a sound signal, navigation lights and a way to call for help such as a VHF radio. A paddle or a small auxiliary engine, a spare propeller, spare fuel, a basic tool kit, a spare kill-switch lanyard, plugs and a fuel filter can turn a breakdown into a short delay.

Always wear the kill-switch lanyard while the engine is running, keep people well clear of the propeller when anyone is in the water, and never run the engine in an enclosed space because exhaust gases are dangerous.

Long-Term Ownership and Resale Value

Outboards from the major brands hold their value well when they are cared for. To get the most from the Yamaha 175 HP F175LA over its life, keep every service receipt in one place, use genuine or manufacturer-approved parts and oils, and record engine hours at each service. Fit a cover when the boat is stored, keep the anodes in good condition, and touch up chipped paint on the gearcase before corrosion starts. A well-documented engine is easier to sell, and buyers will pay more for one with a clear history.

If you ever upgrade, a clean, well-maintained Yamaha 175 HP F175LA is also a strong candidate for trade or private sale. Our guide on buying used outboard motors explains what buyers look for, which is useful to know as an owner too.

Typical Uses for the Yamaha 175 HP F175LA

Owners choose the Yamaha 175 HP F175LA for a wide range of jobs. Some of the most common are:

  • Inshore and near-shore fishing in a center console or bay boat
  • Watersports and day cruising with a full crew
  • Powering larger tritoon and pontoon boats
  • Repowering an older boat with a lighter, more efficient four-stroke

Whatever you use it for, the same basics apply: match the engine to the boat’s rating, choose the right propeller, keep up with servicing and treat the fuel well. Do that, and the Yamaha 175 HP F175LA should give you dependable, economical running season after season. If you are unsure whether it suits your plans, tell us about your boat and how you use it, and we will help you decide.

First-Trip Checklist for the Yamaha 175 HP F175LA

Before you take the Yamaha 175 HP F175LA out for the first time, run through a simple checklist. It takes a few minutes and catches most of the problems that spoil a first outing.

  • Confirm the engine is securely mounted and the mounting bolts or clamp screws are tight.
  • Check the engine oil level and the gearcase oil, as the engine may have been shipped with minimal oil; follow the owner’s manual.
  • Check that the fuel line, primer bulb and connectors are secure and that there are no leaks.
  • Make sure the propeller is the right one for your boat, correctly fitted and secured with its nut and cotter pin or locking tab.
  • Test the kill-switch lanyard, the neutral-start safety and the steering from lock to lock.
  • Run the engine in the water and confirm a steady stream from the cooling-water tell-tale before you leave the dock.
  • Keep the first outing short and close to shore, and follow the break-in instructions.

Any issue that appears on the first trip is far easier to sort out close to home. If you have questions at any stage, contact us and we will help.

Ordering and Delivery

Delivery times and costs depend on your location and the shipping method; the details are on our shipping policy page. When the Yamaha 175 HP F175LA arrives, inspect the crate or packaging before signing, note any visible damage on the delivery receipt and take photos. Check the model code on the engine’s identification plate against your order, and keep all paperwork, as you will need it for registration and future service. If you have any questions about what is included, such as a propeller, controls or a fuel tank, contact us before you order.

Frequently Asked Questions About the Yamaha 175 HP F175LA

What boats is the Yamaha 175 HP F175LA suited to?

It is best suited to center consoles, bay boats, larger pontoons and family cruisers, within the limits on your boat’s capacity plate.

Can I use it in salt water?

Yes. Like other modern marine outboards, the Yamaha 175 HP F175LA is designed for both fresh and salt water. After saltwater use, flush the engine with fresh water and check the anodes regularly.

What fuel does it use?

It runs on unleaded petrol of the octane given in the owner’s manual. As a four-stroke, it needs no oil mixed into the fuel.

How often does it need servicing?

Most four-stroke outboards need a first service after their break-in hours and then a full service every 100 hours or once a year, whichever comes first. Check the Yamaha owner’s manual for the exact schedule.

How do I choose the shaft length?

Measure from the top of the transom to the bottom of the hull on the centreline. About 15 inches suits a short shaft, 20 inches a long shaft, 25 inches an extra-long shaft and 30 inches an ultra-long shaft.

How long will it last?

With regular servicing, correct storage and sensible use, a modern four-stroke outboard can give many years of reliable service. Engine hours, maintenance history and how hard it has been run matter more than age alone.

Can I fit it myself?

Remote-control engines involve controls, steering, fuel and electrical work, so we recommend a qualified marine technician for the installation.

Is a propeller included?

Supply varies by model and listing. Please contact us before ordering and we will confirm exactly what comes with the engine.

More Outboards and Buying Guides

The current price of the Yamaha 175 HP F175LA is shown on this page. See our shipping policy for delivery details, browse more engines in the Yamaha outboard motors category, or ask our team about rigging and fit.