HONDA 30 HP BF30D3SRT OUTBOARD MOTOR FOR SALE
$4,850.00
Honda 30 HP BF30D3SRT: 30 HP Honda four-stroke outboard
- Engine: 552 cc three-cylinder SOHC four-stroke
- Shaft: 15 in
- Starting: electric start
- Steering: remote
- Trim and tilt: power trim and tilt
- Gearcase: standard
- Use: jon boats, aluminium fishing boats, skiffs and small pontoons
Did you like this product? Add to favorites now and follow the product.
Description
The Honda 30 HP BF30D3SRT is a 30 HP Honda four-stroke outboard with a 15-inch shaft, electric start, remote steering and power trim and tilt. It uses a 552 cc three-cylinder SOHC four-stroke and suits jon boats, aluminium fishing boats, skiffs and small pontoons.
What the BF30D3SRT Model Code Means
- Shaft: S = 15-inch short shaft
- R: remote control
- Start and tilt: electric start, power trim and tilt
Key Features of the Honda 30 HP BF30D3SRT
The BF25 and BF30 use a compact three-cylinder powerhead, which runs more smoothly than a twin and delivers good mid-range torque for planing loaded boats.
Remote control
This version is designed for console steering. Plan for compatible Honda controls, cables, gauges and a marine battery.
Who the Honda 30 HP BF30D3SRT Suits
A 30 HP Honda like this is a good match for a 14 to 17 ft aluminium boat, a jon boat or a small pontoon. Honda outboards are known for quiet, smooth running and car-derived engineering, and our Honda 30 HP outboard guide goes deeper into this power class. If you are choosing a starting method, our guide to electric start vs manual start outboards explains the trade-offs. Our long shaft vs short shaft guide helps you match the shaft to your transom.
Why Choose a Honda 30 HP Four-Stroke
Honda builds only four-stroke outboards, and many of its engines share technology with Honda cars, which is a big part of their reputation for reliability. A four-stroke runs on straight petrol with no oil to premix, and it is quieter and cleaner than an old two-stroke of similar power. Routine care is straightforward: change the engine oil, filter and gear oil on schedule, check the anodes, flush with fresh water after use in salt water and inspect the propeller. Honda also has dealers and parts suppliers in many countries, so service items are easy to source.
Honda 30 HP BF30D3SRT Specifications
- Output: 30 HP
- Engine: 552 cc three-cylinder SOHC four-stroke
- Shaft length: 15 in
- Starting: electric start
- Steering: remote
- Trim and tilt: power trim and tilt
Rigging and Running the Honda 30 HP BF30D3SRT
For a tiller model you need little more than a fuel tank and, for electric start, a battery. Remote models need controls, steering and gauges. Keep a spare propeller and a basic tool kit on board.
Follow our Honda outboard service schedule, change the lower unit oil on time and winterize the engine if it will sit unused for months. Official specifications are on Honda Marine’s website.
Before You Buy the Honda 30 HP BF30D3SRT
- Measure your transom to confirm the shaft length.
- Check your boat’s capacity plate allows 30 HP and the engine weight.
- Choose a propeller with our propeller buying guide, and follow the break-in steps for a new outboard.
How the Honda 30 HP BF30D3SRT Performs on the Water
With 30 HP the Honda 30 HP BF30D3SRT has enough power to put a light aluminium boat, a jon boat or an inflatable with two or three people on the plane. Throttle response is crisp, and the engine settles to a quiet, economical cruise once the hull is planing. At the other end of the range it idles and trolls smoothly, so it suits fishermen who spend long periods at low speed. Load and hull shape make a big difference at this size: a lightly loaded flat-bottom boat will feel lively, while a heavy, deep-V hull will need a well-chosen propeller to plane easily.
Performance on your boat will depend on hull type, load, trim and propeller. That is why we always suggest matching the propeller to the boat rather than relying on the one fitted at the factory.
Is 30 HP the Right Size for Your Boat?
Start with the capacity plate fixed near the helm or transom of your boat. It states the maximum horsepower and the maximum engine weight the hull is rated for, and you should never exceed either. Within that limit, an engine close to the rated maximum usually gives the best all-round performance, while a smaller engine saves weight and money but may struggle with a full load. Think about your typical load too: the number of people, fuel, water, fishing or diving gear can easily add several hundred pounds.
If you are repowering, compare the Honda 30 HP BF30D3SRT with the engine you are replacing. Changing the weight on the transom alters trim and how the boat sits in the water, so a large step up or down in weight may need a different propeller or a change in mounting height. Our repower cost guide helps you plan the whole job.
Choosing a Propeller for the Honda 30 HP BF30D3SRT
The propeller is the single biggest factor in how the Honda 30 HP BF30D3SRT performs on your boat. The goal is for the engine to reach the top of its rated full-throttle rpm range with a normal load. If it over-revs, fit a propeller with more pitch; if it cannot reach the range, reduce the pitch. As a rule of thumb, each inch of pitch changes full-throttle engine speed by roughly 150 to 200 rpm.
- Aluminium propellers are affordable and a good choice for shallow or debris-filled water, where a strike is likely.
- Stainless steel propellers cost more but flex less, keep their shape and often improve hole shot and top speed.
- Rotation: Standard-rotation engines use a right-hand propeller; check the rotation marking before you buy a spare.
Keep a spare propeller and the fitting kit on board. For a fuller explanation of pitch, diameter and blade count, read our propeller buying guide.
Installing and Mounting the Honda 30 HP BF30D3SRT
Remote-control models like the Honda 30 HP BF30D3SRT need controls, a steering system, a fuel system, gauges and a correctly sized battery cable. Many owners have a qualified marine technician rig the boat, because control cable adjustment, steering set-up and wiring all affect safety and reliability.
Mounting height matters on every outboard. As a starting point, the anti-ventilation plate above the propeller should sit roughly level with the bottom of the hull. Set too low, the gearcase creates drag and spray; set too high, the propeller can ventilate and lose grip in turns. The 15-inch shaft on this model must match your transom height, measured from the top of the transom down to the bottom of the hull on the centreline. Our long shaft vs short shaft guide shows how to measure correctly.
Break-In and the First Hours
A new engine needs a careful break-in so the piston rings, bearings and gears bed in properly. The owner’s manual for the Honda 30 HP BF30D3SRT gives Honda’s exact break-in procedure, and it is worth following to the letter. In general, most makers ask you to vary engine speed, avoid long periods at one rpm and avoid sustained full throttle for roughly the first ten hours. Many also recommend an early first service to change the engine oil and gear oil and check for leaks. Our outboard break-in guide walks through the process step by step.
Fuel, Oil and Everyday Running
Use fresh, good-quality petrol of the octane listed in the owner’s manual for the Honda 30 HP BF30D3SRT. Petrol that contains ethanol absorbs water and goes stale over time, so add a marine fuel stabiliser if the boat will sit for more than a few weeks, and fit a water-separating fuel filter on boats with a built-in tank. Four-stroke engines like this one do not need oil mixed into the fuel, but you should check the engine oil level regularly and use the oil grade the manufacturer specifies.
Before each trip, check the fuel level and connections, make sure the kill-switch lanyard is attached, and confirm a strong stream of cooling water from the tell-tale outlet once the engine starts. After the trip, especially in salt water, flush the engine with fresh water and rinse the outside to slow corrosion.
Maintenance Schedule for the Honda 30 HP BF30D3SRT
Regular maintenance is the best way to keep the Honda 30 HP BF30D3SRT reliable for many seasons. The exact intervals for your engine are in the Honda owner’s manual; the table below shows the kind of schedule most four-stroke outboards follow.
- After every use: flush with fresh water, check for fuel or oil leaks and inspect the propeller.
- First service (often around 20 hours): change the engine oil and gear oil, and check bolts and connections.
- Every 100 hours or once a year: engine oil and filter, gearcase oil, spark plugs, fuel filters, anodes and greasing points.
- Every two to three years: replace the water pump impeller, or sooner if you run in sandy or silty water.
Keep a simple log of hours and services; it helps you plan work and supports resale value. See our Honda outboard maintenance guide and our guide to lower unit oil for more detail.
Storage and Winterizing
If the Honda 30 HP BF30D3SRT will sit unused for more than a month or two, prepare it properly. Stabilise the fuel and run the engine so treated fuel reaches the injectors or carburettor, change the engine oil so acidic old oil does not sit in the engine, change the gear oil and check it for water, fog the cylinders if the manual recommends it, and grease the fittings. Smaller engines are best stored upright or in the position shown in the manual, so oil does not run where it should not. Remove or maintain the battery. Our Honda winterizing guide lists each step.
Troubleshooting Common Issues
Most problems on a well-maintained outboard have simple causes. Check these first before booking a technician:
- Hard starting: stale or contaminated fuel, a blocked fuel filter, a loose kill-switch lanyard, a weak battery or a pinched fuel line.
- No water from the tell-tale: stop the engine and check for a blocked outlet, weed on the water intake or a worn water pump impeller.
- Vibration: a damaged or fouled propeller, or debris wrapped round the propeller shaft.
- Loss of power: fuel restriction, a fouled spark plug, the wrong propeller or too much load. On electronic engines, warning lights or gauge alerts point to the fault.
- Ventilation in turns: mounting height or trim may need adjusting.
If a warning alarm sounds, reduce throttle, stop when it is safe and investigate before running again. Persistent faults should be checked by a qualified technician.
How the Honda 30 HP BF30D3SRT Compares With Other Options
As a remote-control engine, the Honda 30 HP BF30D3SRT suits boats with a console. If you have a small open boat with no console, a tiller version of a similar engine can save rigging cost and weight.
Shaft length is the other key choice. This model has a 15-inch shaft; other versions of the same engine are available in different lengths to suit lower or higher transoms. Across brands, Honda competes closely with the other leading outboard makers on reliability, fuel economy and service support, so the best choice often comes down to dealer access where you boat, controls and gauges already on the boat, and the specific features you value. Our outboard brands comparison sets out the main differences.
Getting the Best Fuel Economy From the Honda 30 HP BF30D3SRT
Fuel is one of the biggest running costs of any boat, and a few habits make a real difference. First, trim the engine so the bow lifts slightly and the boat runs on the flattest part of the hull; too much trim makes the propeller ventilate, too little pushes the bow into the water. Second, find the boat’s most efficient cruising speed, usually just above the point where it planes cleanly, rather than running near full throttle. Third, spread the load evenly and avoid carrying weight you do not need, such as full water tanks or unused gear.
A clean hull and a propeller in good condition also save fuel: marine growth, dents and bent blades all increase drag. On a small engine like the Honda 30 HP BF30D3SRT, simply easing back from full throttle often cuts fuel use dramatically with only a small loss of speed. Our guides to outboard fuel efficiency and four-stroke outboards go into more detail.
Controls, Gauges and Electronics
A remote-control engine like the Honda 30 HP BF30D3SRT connects to a binnacle or panel control at the helm, plus gauges that show engine speed, trim, temperature, fuel and alerts. Modern engines often send this data over a digital network, so a compatible multifunction display can show it alongside your chartplotter and sonar. Use correctly sized battery cables, a battery switch and good-quality marine connectors, and route wiring away from fuel lines and moving parts.
Whatever the set-up, test the kill switch and the neutral-start safety feature regularly. If the engine will start in gear or the lanyard does not stop it, have it repaired before you go out.
Safety Equipment and Good Habits
A reliable engine is only part of safe boating. Before every trip with the Honda 30 HP BF30D3SRT, check the weather and tell someone where you are going and when you expect to return. Carry the safety equipment your local rules require, which usually includes lifejackets for everyone on board, a fire extinguisher, a sound signal, navigation lights and a way to call for help such as a VHF radio. A paddle or a small auxiliary engine, a spare propeller, spare fuel, a basic tool kit, a spare kill-switch lanyard, plugs and a fuel filter can turn a breakdown into a short delay.
Always wear the kill-switch lanyard while the engine is running, keep people well clear of the propeller when anyone is in the water, and never run the engine in an enclosed space because exhaust gases are dangerous.
Long-Term Ownership and Resale Value
Outboards from the major brands hold their value well when they are cared for. To get the most from the Honda 30 HP BF30D3SRT over its life, keep every service receipt in one place, use genuine or manufacturer-approved parts and oils, and record engine hours at each service. Fit a cover when the boat is stored, keep the anodes in good condition, and touch up chipped paint on the gearcase before corrosion starts. A well-documented engine is easier to sell, and buyers will pay more for one with a clear history.
If you ever upgrade, a clean, well-maintained Honda 30 HP BF30D3SRT is also a strong candidate for trade or private sale. Our guide on buying used outboard motors explains what buyers look for, which is useful to know as an owner too.
Typical Uses for the Honda 30 HP BF30D3SRT
Owners choose the Honda 30 HP BF30D3SRT for a wide range of jobs. Some of the most common are:
- Fishing lakes, rivers and estuaries in an aluminium boat or jon boat
- Running a RIB or inflatable as a tender to a larger yacht
- Light work duties such as checking moorings, nets or pens
- Powering a small pontoon for relaxed family cruising
Whatever you use it for, the same basics apply: match the engine to the boat’s rating, choose the right propeller, keep up with servicing and treat the fuel well. Do that, and the Honda 30 HP BF30D3SRT should give you dependable, economical running season after season. If you are unsure whether it suits your plans, tell us about your boat and how you use it, and we will help you decide.
Ordering and Delivery
Delivery times and costs depend on your location and the shipping method; the details are on our shipping policy page. When the Honda 30 HP BF30D3SRT arrives, inspect the crate or packaging before signing, note any visible damage on the delivery receipt and take photos. Check the model code on the engine’s identification plate against your order, and keep all paperwork, as you will need it for registration and future service. If you have any questions about what is included, such as a propeller, controls or a fuel tank, contact us before you order.
Frequently Asked Questions About the Honda 30 HP BF30D3SRT
What boats is the Honda 30 HP BF30D3SRT suited to?
It is best suited to aluminium boats, jon boats, inflatables, skiffs and small pontoons, within the limits on your boat’s capacity plate.
Can I use it in salt water?
Yes. Like other modern marine outboards, the Honda 30 HP BF30D3SRT is designed for both fresh and salt water. After saltwater use, flush the engine with fresh water and check the anodes regularly.
What fuel does it use?
It runs on unleaded petrol of the octane given in the owner’s manual. As a four-stroke, it needs no oil mixed into the fuel.
How often does it need servicing?
Most four-stroke outboards need a first service after their break-in hours and then a full service every 100 hours or once a year, whichever comes first. Check the Honda owner’s manual for the exact schedule.
How do I choose the shaft length?
Measure from the top of the transom to the bottom of the hull on the centreline. About 15 inches suits a short shaft, 20 inches a long shaft, 25 inches an extra-long shaft and 30 inches an ultra-long shaft.
How long will it last?
With regular servicing, correct storage and sensible use, a modern four-stroke outboard can give many years of reliable service. Engine hours, maintenance history and how hard it has been run matter more than age alone.
Can I fit it myself?
Remote-control engines involve controls, steering, fuel and electrical work, so we recommend a qualified marine technician for the installation.
Is a propeller included?
Supply varies by model and listing. Please contact us before ordering and we will confirm exactly what comes with the engine.
More Outboards and Buying Guides
- Honda 30 Hp Bf30d3lrt
- Honda 30 Hp Bf30d3lrg
- Honda 8 Hp Bf8dk3sha
- Buying Honda outboards: the complete guide
- How to choose an outboard motor
- Choosing an outboard for a pontoon
- Honda outboard weight and size guide
- Honda vs Suzuki outboards compared
- How we test every engine before it ships
The current Honda 30 HP BF30D3SRT price is shown on this page. Check our shipping policy and returns policy, compare the full Honda 30 HP outboards, or contact us with any fit or rigging questions.







Reviews
There are no reviews yet.